Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Fault Current Limiter Circuit to Improve Transient Stability in Power System

International Journal of Power Electronics and Drive Systems · Vol. 7 No. 3 (2016) · hlm. 769–780

DOI
10.11591/ijpeds.v7.i3.pp769-780
ISSN
2722-256X, 2088-8694
Terbit
2016-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Short circuit current limitation in distribution system utilities can be an operational approach to improve power quality, since the estimated voltage sag amplitude during faults may be intensely reduced. The application of superconducting fault current limiter (SFCL) is projected here to limit the fault current that occurs in power system. SFCL utilizes superconductors to instantaneously decrease the unanticipated electrical surges that happen on utility distribution and power transmission networks. SFCL considerably decrease the economic burden on the utilities by reducing the wear on circuit breakers and protecting other expensive equipment. The designed SFCL model is used for determining an impedance level of SFCL according to the fault current limitation necessities of different types of the smart grid system. The representation of this paper about to see the optimum resistive value of SFCL for enhancing the transient stability of a power system. The assessment of optimal resistive value of the SFCL connected in series in a transmission line with a conductor throughout a short circuit fault is consistently determined by applying the equal-area criterion supported by power-angle curves. A Simulink based primary model is developed and additionally the simulation results for the projected model are achieved by using MATLAB.

Jaringan kolaborasi para penulis

28 penulis · 66 tautan kepenulisan bersama · 29 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indian Institute of Technology Dhanbad
  • Saroj Mohan Institute of Technology
  • Techno India Group (India)
  • National Institute of Technology Meghalaya
  • University of Burdwan
  • KIIT University
  • Maulana Abul Kalam Azad University of Technology, West Bengal
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nitai PalIndian Institute of Technology Dhanbad10
Avijit ChakrabortyIndian Institute of Technology Dhanbad4
Palash PalSaroj Mohan Institute of Technology4
Kallol BhaumikSaroj Mohan Institute of Technology2
Pritish Kumar GhoshAfiliasi tidak diketahui2
Amarnath SanyalAfiliasi tidak diketahui2
Niladri DasIndian Institute of Technology Dhanbad1
Moumita SadhuAfiliasi tidak diketahui1
Suprava ChakrabortyAfiliasi tidak diketahui1
Kaushik NeogiAfiliasi tidak diketahui1
Atanu BanerjeeNational Institute of Technology Meghalaya1
Sourish SanyalAfiliasi tidak diketahui1
Sourish SanyalAfiliasi tidak diketahui1
Debabrata RoyAfiliasi tidak diketahui1
Himanshu SharmaIndian Institute of Technology Dhanbad1
Yaduvir SinghIndian Institute of Technology Dhanbad1
Soumya DasUniversity of Burdwan1
Gourav MajumdarKIIT University1
Saswata MukherjeeMaulana Abul Kalam Azad University of Technology, West Bengal1
Arijit ChakrabartiIndian Institute of Technology Dhanbad1
Titas Kumar NagAfiliasi tidak diketahui1
Atif IqbalQatar University1
Ahmed RiyazIndian Institute of Technology Dhanbad1
Md Abdullah AnsariAix-Marseille Université1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Fault Current Limiter Circuit to Improve  Transient Stability in Power System</dc:title>
	<dc:creator>Dhara, Saumen</dc:creator>
	<dc:creator>Shrivastav, Alok Kumar</dc:creator>
	<dc:creator>Sadhu, Pradip Kumar</dc:creator>
	<dc:creator>Ganguly, Ankur</dc:creator>
	<dc:description xml:lang="en-US">Short circuit current limitation in distribution system utilities can be an operational approach to improve power quality, since the estimated voltage sag amplitude during faults may be intensely reduced. The application of superconducting fault current limiter (SFCL) is projected here to limit the fault current that occurs in power system. SFCL utilizes superconductors to instantaneously decrease the unanticipated electrical surges that happen on utility distribution and power transmission networks. SFCL considerably decrease the economic burden on the utilities by reducing the wear on circuit breakers and protecting other expensive equipment. The designed SFCL model is used for determining an impedance level of SFCL according to the fault current limitation necessities of different types of the smart grid system. The representation of this paper about to see the optimum resistive value of SFCL for enhancing the transient stability of a power system. The assessment of optimal resistive value of the SFCL connected in series in a transmission line with a conductor throughout a short circuit fault is consistently determined by applying the equal-area criterion supported by power-angle curves. A Simulink based primary model is developed and additionally the simulation results for the projected model are achieved by using MATLAB.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2016-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5258</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v7.i3.pp769-780</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 7, No 3: September 2016; 769-780</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v7.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5258/5479</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 Saumen Dhara, Alok Kumar Shrivastav, Pradip Kumar Sadhu, Ankur Ganguly</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>