Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A comparison between six-step and sine-wave commutation methods for brushless direct current motors

International Journal of Power Electronics and Drive Systems · Vol. 13 No. 2 (2022) · hlm. 665–673

DOI
10.11591/ijpeds.v13.i2.pp665-673
ISSN
2722-256X, 2088-8694
Terbit
2022-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This research is focused on the design and implementation of an electronic circuit for commuting a brushless direct current (BLDC) motor and its data acquisition system, as well as conducting experiments on them. We propose a drive circuit using two modules, each consist of a dual H-bridge, that are cheap and can be easily obtained. Two different commutation methods, namely six-step and sine-wave commutations, are applied. Each of these implements a different way for its open-loop speed control, i.e., a voltage-controlled-current-source is implemented along with the six-step commutation and the step duration approach is implemented along with the sine-wave commutation. The experiment data are acquired using a developed desktop application. Some experiment results lead us to find that, on its own, both commutation methods have a narrow range of speed. Nevertheless, if both methods are used together, this range can be increased. Also, the relation between speed and its controlling signals for both methods are shown.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 17 tautan kepenulisan bersama · 6 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Universitas Gadjah Mada
  • Bandung Institute of Technology
  • Tampere University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Djoko SuprijantoBandung Institute of Technology1
Edi KurniawanNational Research and Innovation Agency1
Jalu A. PrakosaNational Research and Innovation Agency1
Samsul HafizNational Research and Innovation Agency1
Made Widhi Surya AtmanTampere University1
Oetomo SudjanaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A comparison between six-step and sine-wave commutation methods for brushless direct current motors</dc:title>
	<dc:creator>Al-Faruq, Hilmi Yafi</dc:creator>
	<dc:creator>Septanto, Harry</dc:creator>
	<dc:subject xml:lang="en-US">BLDC motor; Data acquisition system; Electronic commutation circuit; H-bridge; Open-loop speed control</dc:subject>
	<dc:description xml:lang="en-US">This research is focused on the design and implementation of an electronic circuit for commuting a brushless direct current (BLDC) motor and its data acquisition system, as well as conducting experiments on them. We propose a drive circuit using two modules, each consist of a dual H-bridge, that are cheap and can be easily obtained. Two different commutation methods, namely six-step and sine-wave commutations, are applied. Each of these implements a different way for its open-loop speed control, i.e., a voltage-controlled-current-source is implemented along with the six-step commutation and the step duration approach is implemented along with the sine-wave commutation. The experiment data are acquired using a developed desktop application. Some experiment results lead us to find that, on its own, both commutation methods have a narrow range of speed. Nevertheless, if both methods are used together, this range can be increased. Also, the relation between speed and its controlling signals for both methods are shown.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20933</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v13.i2.pp665-673</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 13, No 2: June 2022; 665-673</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v13.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20933/13829</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Hilmi Yafi Al-Faruq, Harry Septanto</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>