Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Comparison of different magnet arrangement on performance of flux reversal permanent magnet (FRPM) machine

International Journal of Power Electronics and Drive Systems · Vol. 10 No. 3 (2019) · hlm. 1207–1214

DOI
10.11591/ijpeds.v10.i3.pp1207-1214
ISSN
2722-256X, 2088-8694
Terbit
2019-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper offers the analysis of performance of Flux Reversal Permanent Magnet (FRPM) machines with different type of magnet arrangements. There are two designs that have been proposed in this report, which one of them has a pair of permanent magnets (PM) with alternate polarities place on surface of stator tooth and the polarities of two adjacent PM at these two stators are identical. This PM arrangement is called as NS-SN configuration. Second design is NS-NS configuration that has different PM polarities on different stator tooth. By comparing this PM arrangement, generally the NS-NS configuration offers high speed and power. However, the NS-SN configuration shows higher maximum torque compared to the previous design. The design process for both configurations is completely using finite element analysis (FEA) which is JMAG-Designer. To make sure the coil phase is in correct position, the design configuration with coil arrangement tests are evaluated. Finally, each flux of both designs been observed by analyse their torque with various armature current density.

Jaringan kolaborasi para penulis

9 penulis · 15 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Newcastle University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Shamsul Aizam ZulkifliTun Hussein Onn University of Malaysia3
KueiTsun ChenTun Hussein Onn University of Malaysia2
Glynn J. AtkinsonNewcastle University2
Matthew ArmstrongNewcastle University1
A.F.M. NoorTun Hussein Onn University of Malaysia1
Siti Amely JumaatTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Comparison of different magnet arrangement on performance of flux reversal permanent magnet (FRPM) machine</dc:title>
	<dc:creator>Remlan, M. H.</dc:creator>
	<dc:creator>Aziz, R.</dc:creator>
	<dc:creator>Salimin, S</dc:creator>
	<dc:description xml:lang="en-US">This paper offers the analysis of performance of Flux Reversal Permanent Magnet (FRPM) machines with different type of magnet arrangements. There are two designs that have been proposed in this report, which one of them has a pair of permanent magnets (PM) with alternate polarities place on surface of stator tooth and the polarities of two adjacent PM at these two stators are identical. This PM arrangement is called as NS-SN configuration. Second design is NS-NS configuration that has different PM polarities on different stator tooth. By comparing this PM arrangement, generally the NS-NS configuration offers high speed and power. However, the NS-SN configuration shows higher maximum torque compared to the previous design. The design process for both configurations is completely using finite element analysis (FEA) which is JMAG-Designer. To make sure the coil phase is in correct position, the design configuration with coil arrangement tests are evaluated. Finally, each flux of both designs been observed by analyse their torque with various armature current density.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/19851</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v10.i3.pp1207-1214</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 10, No 3: September 2019; 1207-1214</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v10.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/19851/12843</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 M. H. Remlan, R. Aziz, S Salimin</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>