This paper was intended to examine thoroughly a critical condition of the sensorless induction generator using flux weakening in wind turbine application. The critical condition would happen when the rotor speed reached the critical rotor speed reference. The critical rotor speed reference was the highest of the rotor speed reference that still caused the stable response. It was obtained by increasing the rotor speed reference until the system response became unstable. In the low speed range of wind showed that there was no unstable condition whatever a rotor speed reference was set. On the other hand, there was a critical rotor speed reference in the medium and high speed range of wind. The unstable condition was caused by the induction generator that received a power higher than its capacity, so its rotor speed couldn't be maintained at reference value. The first solution was suggested that the stable condition would be made by setting the rotor speed reference at the minimum critical reference. The second solution was suggested that the controlling rotor speed in triangle area between the critical condition and the operation that used the minimum critical reference for the rotor speed reference. In the triangle area, the rotor speed was controlled by setting the tip speed ratio.
Jaringan kolaborasi para penulis
8 penulis ·
14 tautan kepenulisan bersama
· 4 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
University of Indonesia
Universitas Muhammadiyah Jakarta
Sultan Agung Islamic University
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.