Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Carrier Based Pulse Width Modulation Control of a Non-Square Direct Matrix Converter with Seven-phase Input and Three-phase Output

International Journal of Power Electronics and Drive Systems · Vol. 3 No. 3 (2013) · hlm. 344–350

ISSN
2722-256X, 2088-8694
Terbit
2013-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents pulse width modulation technique for a direct ac-ac converter. The converter has seven-phase input supply and three-phase output. The input supply may be obtained from a seven-phase wind energy generation system with variable output voltage magnitude and frequency. The output of the proposed converter topology may be fed to the three-phase stiff grid system. Thus the requirement of the modulation of the ac-ac converter is to produce fixed voltage and fixed frequency output while the input can be variable. Additionally the output voltage gain should be high. Simple carrier-based PWM technique is suggested and harmonic injection scheme is proposed to enhance the output voltage magnitude. The output voltage reaches 90% of the input supply voltage with the proposed technique. An additional control block is used to stabilize the output voltage and frequency of the converter. Simulation results are shown in the paper for the verification of the proposed scheme.DOI: http://dx.doi.org/10.11591/ijpeds.v3i3.4315

Jaringan kolaborasi para penulis

8 penulis · 12 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Texas A&M University at Qatar
  • Qatar University
  • Diponegoro University
  • Universitas Ahmad Dahlan
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sk. Moin AhmedTexas A&M University at Qatar1
Shady S. RefaatTexas A&M University at Qatar1
Atif IqbalQatar University1
Mochammad FactaDiponegoro University1
Tole SutiknoUniversitas Ahmad Dahlan1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Carrier Based Pulse Width Modulation Control of a Non-Square Direct Matrix Converter with Seven-phase Input and Three-phase Output</dc:title>
	<dc:creator>Moin Ahmed, Sk</dc:creator>
	<dc:creator>Abu-Rub, Haitham</dc:creator>
	<dc:creator>Salam, Zainal</dc:creator>
	<dc:description xml:lang="en-US">This paper presents pulse width modulation technique for a direct ac-ac converter. The converter has seven-phase input supply and three-phase output. The input supply may be obtained from a seven-phase wind energy generation system with variable output voltage magnitude and frequency. The output of the proposed converter topology may be fed to the three-phase stiff grid system. Thus the requirement of the modulation of the ac-ac converter is to produce fixed voltage and fixed frequency output while the input can be variable. Additionally the output voltage gain should be high. Simple carrier-based PWM technique is suggested and harmonic injection scheme is proposed to enhance the output voltage magnitude. The output voltage reaches 90% of the input supply voltage with the proposed technique. An additional control block is used to stabilize the output voltage and frequency of the converter. Simulation results are shown in the paper for the verification of the proposed scheme.DOI: http://dx.doi.org/10.11591/ijpeds.v3i3.4315</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2013-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/4961</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 3, No 3: September 2013; 344-350</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v3.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/4961/5084</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2013 Sk Moin Ahmed, Haitham Abu-Rub, Zainal Salam</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>