Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Joule heating estimation of photovoltaic module through cells temperature measurement

International Journal of Power Electronics and Drive Systems · Vol. 13 No. 2 (2022) · hlm. 1119–1128

DOI
10.11591/ijpeds.v13.i2.pp1119-1128
ISSN
2722-256X, 2088-8694
Terbit
2022-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Module temperature has a role in determining a PV module's performance. The purpose of this paper is to estimate the Joule heating in a photovoltaic (PV) module by comparing during PV-On (electricity generation) and PV-Off (without electricity generation). Joule heating was less evaluated due to simplifying formulation, which is easier to implement in experimental observation as proposed in this work. The experiment collected the temperature distributions of the PV module during PV-On and PV-Off. PV module temperature distribution follows the normal distribution curve as the irradiation uniformity pattern of the solar simulator has a slight ≤0.3 oC difference between PV-On and PV-Off. Joule heating slightly increased the PV module temperature by 0.53 K/A, proportional to the irradiances. Joule heating has increased almost seven times from 2.65 W at 700 W/m2 to 18.07 W at 1000 W/m2. Joule heating might slightly increase the overall thermal conductivity and slightly decrease the thermal resistances. It might affect the heat transfer. This research may improve the procedures prediction of PV or photovoltaic-thermal (PVT) collector temperature by considering Joule heating.

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 19 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Darma Persada
  • Kanagawa Institute of Technology
  • Bandung Institute of Technology
  • Arizona State University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sparisoma ViridiBandung Institute of Technology1
Rizal F. HariadiArizona State University1
Erik HilmiUniversitas Darma Persada1
Uhanto UhantoUniversitas Darma Persada1
Rifki SaifulUniversitas Darma Persada1
Dewi Putriani Yogosara LodewijkAfiliasi tidak diketahui1
Ratna AriatiUniversitas Darma Persada1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Joule heating estimation of photovoltaic module through cells temperature measurement</dc:title>
	<dc:creator>Yandri, Erkata</dc:creator>
	<dc:creator>Hagino, Naoto</dc:creator>
	<dc:subject xml:lang="en-US">Continuous probability; PV efficiency; PV temperature; Series resistance loss; Thermal distribution; Thermal efficiency</dc:subject>
	<dc:description xml:lang="en-US">Module temperature has a role in determining a PV module's performance. The purpose of this paper is to estimate the Joule heating in a photovoltaic (PV) module by comparing during PV-On (electricity generation) and PV-Off (without electricity generation). Joule heating was less evaluated due to simplifying formulation, which is easier to implement in experimental observation as proposed in this work. The experiment collected the temperature distributions of the PV module during PV-On and PV-Off. PV module temperature distribution follows the normal distribution curve as the irradiation uniformity pattern of the solar simulator has a slight ≤0.3 oC difference between PV-On and PV-Off. Joule heating slightly increased the PV module temperature by 0.53 K/A, proportional to the irradiances. Joule heating has increased almost seven times from 2.65 W at 700 W/m2 to 18.07 W at 1000 W/m2. Joule heating might slightly increase the overall thermal conductivity and slightly decrease the thermal resistances. It might affect the heat transfer. This research may improve the procedures prediction of PV or photovoltaic-thermal (PVT) collector temperature by considering Joule heating.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21939</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v13.i2.pp1119-1128</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 13, No 2: June 2022; 1119-1128</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v13.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21939/13868</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Erkata Yandri, Naoto Hagino</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>