Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Performance Analysis of (Bi2Te3-PbTe) Hybrid Thermoelectric Generator

International Journal of Power Electronics and Drive Systems · Vol. 8 No. 2 (2017) · hlm. 917–925

DOI
10.11591/ijpeds.v8.i2.pp917-925
ISSN
2722-256X, 2088-8694
Terbit
2017-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

A theoretical analysis on the performance of (Bi2Te3-PbTe) hybrid thermoelectric generator (TEG) is presented in this paper. The effect of different performance parameters such as output voltage, output current, output power, maximum power output, open circuit voltage, Seebeck co-efficient, electrical resistance, thermal conductance, figure of merit, efficiency, heat absorbed and heat removed based on maximum conversion and power efficiency have been analyzed by varying the hot side temperature up to 350oC and by varying the cold side temperature from 30oC to 150oC. The results showed that a maximum power output of 21.7 W has been obtained with the use of one hybrid thermoelectric module for a temperature difference of 320oC between the hot and cold side of the thermoelectric generator at matched load resistance. The figure of merit was found to be around 1.28 which makes its usage possible in the intermediate temperature (250oC to 350oC) applications such as heating of Biomass waste, heat from Biomass cook stoves or waste heat recovery etc. It is also observed that the hybrid thermoelectric generator offers superior performance over 250oC of the hot side temperature, compared to standard Bi2Te3 modules

Jaringan kolaborasi para penulis

8 penulis · 12 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Karunya University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Khammampati R SreejyothiKarunya University2
Pandiyan Venkatesh KumarKarunya University2
Francisxavier Thomas JoshKarunya University1
Jeyaraj Jency JosephAfiliasi tidak diketahui1
Karunakar thadkapallyKarunya University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Performance Analysis of (Bi2Te3-PbTe) Hybrid Thermoelectric Generator</dc:title>
	<dc:creator>Angeline A, Anitha</dc:creator>
	<dc:creator>J, Jayakumar</dc:creator>
	<dc:creator>Godson Asirvatham, Lazarus</dc:creator>
	<dc:description xml:lang="en-US">A theoretical analysis on the performance of (Bi2Te3-PbTe) hybrid thermoelectric generator (TEG) is presented in this paper. The effect  of different performance parameters such as output voltage, output current, output power, maximum power output, open circuit voltage, Seebeck  co-efficient, electrical resistance, thermal conductance, figure of merit, efficiency, heat absorbed and heat removed based on maximum conversion and power efficiency have been analyzed by varying the hot side temperature up to 350oC and by varying the cold side temperature from 30oC to 150oC. The results showed that a maximum power output of 21.7 W has been obtained with the use of one hybrid thermoelectric module for a temperature difference of 320oC between the hot and cold side of the thermoelectric generator at matched load resistance. The figure of merit was found to be around 1.28 which makes its usage possible in the intermediate temperature (250oC to 350oC) applications such as heating of Biomass waste, heat from Biomass cook stoves or waste heat recovery etc. It is also observed that the hybrid thermoelectric generator offers superior performance over 250oC  of the hot side temperature, compared to standard Bi2Te3 modules</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2017-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/6778</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v8.i2.pp917-925</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 8, No 2: June 2017; 917-925</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v8.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/6778/6417</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 Anitha Angeline A, Jayakumar J, Lazarus Godson Asirvatham</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>