Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and Analysis of In-Wheel Double Stator Slotted Rotor BLDC Motor for Electric Bicycle Application

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 1 (2018) · hlm. 457–464

DOI
10.11591/ijpeds.v9.i1.pp457-464
ISSN
2722-256X, 2088-8694
Terbit
2018-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper discusses about design and analysis of double stator slotted rotor (DSSR) BLDC motor for electric bicycle application. Usually single stator (SS) BLDC motor is used in an electric bicycle. This type of motor has low performance and need to be charged regularly. The objective of this research is to design and analysis DSSR motor that have high torque. At starts, design specification for the electric bicycle is calculated. Next, design process for DSSR is carried out by using the desired parameter. Lastly, analysis for double stator slotted rotor is simulated using FEM. Result for average back emf, average inductance, inner stator flux density, outer stator flux density, average torque and estimate torque constant is obtained. Result for average torque from FEM archieve the requirement of motor torque for DSSR design where the maximum average torque is 16.2 Nm. This research will give benefit to mankind and society in term of environment protection and energy consumption.

Jaringan kolaborasi para penulis

40 penulis · 137 tautan kepenulisan bersama · 54 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Universiti Malaysia Perlis
  • Universitas Ahmad Dahlan
  • Universiti Sains Malaysia
  • Tun Hussein Onn University of Malaysia
  • Islamic Azad University Yasuj
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nik Rumzi Nik IdrisUniversity of Technology Malaysia36
Kasrul Abdul KarimUniversiti Teknikal Malaysia Melaka35
Mohd Hatta JopriUniversiti Teknikal Malaysia Melaka20
Siti Azura Ahmad TarusanUniversiti Teknikal Malaysia Melaka18
Awang JusohUniversity of Technology Malaysia17
Mohammad JannatiUniversity of Technology Malaysia16
Mohd Junaidi Abdul AzizUniversity of Technology Malaysia16
Nor Azizah Mohd YusoffUniversiti Teknikal Malaysia Melaka13
Mustafa ManapUniversiti Teknikal Malaysia Melaka12
Mohd Luqman Mohd Jamil‬Universiti Teknikal Malaysia Melaka12
Mohamed SalemUniversiti Sains Malaysia10
Raja Nor Firdaus Kashfi Raja OthmanUniversiti Teknikal Malaysia Melaka10
Muhammad Zaid AihsanUniversiti Malaysia Perlis10
Abdul Rahim AbdullahUniversiti Teknikal Malaysia Melaka9
Aiman Zakwan JidinUniversiti Teknikal Malaysia Melaka9
Md Hairul Nizam TalibUniversiti Teknikal Malaysia Melaka9
Lina HandayaniUniversitas Ahmad Dahlan8
Shahreen binti KasimTun Hussein Onn University of Malaysia8
Mahmoud ZadehbagheriIslamic Azad University Yasuj8
Azziddin Mohamad RazaliUniversiti Teknikal Malaysia Melaka8
Zulhani RasinUniversiti Teknikal Malaysia Melaka8
Shahrin Md AyobUniversity of Technology Malaysia7
Mochammad FactaDiponegoro University7
Jurifa Mat LaziUniversiti Teknikal Malaysia Melaka7
Azrita binti AliasUniversiti Teknikal Malaysia Melaka7
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis6
Ibrahim AlhamrouniUniversity of Kuala Lumpur6
M. Rahimi YusoffUniversiti Teknikal Malaysia Melaka5
Hendril Satrian PurnamaAfiliasi tidak diketahui5
Watra ArsadiandoAfiliasi tidak diketahui5
Azralmukmin AzmiUniversiti Malaysia Perlis5
Norjulia Mohamad NordinUniversity of Technology Malaysia5

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design and Analysis of In-Wheel Double Stator Slotted Rotor BLDC Motor for Electric Bicycle Application</dc:title>
	<dc:creator>Farina, S.</dc:creator>
	<dc:creator>Firdaus, R.N.</dc:creator>
	<dc:creator>Azhar, F.</dc:creator>
	<dc:creator>Azri, M.</dc:creator>
	<dc:creator>Ahmad, M. S.</dc:creator>
	<dc:creator>Suhairi, R.</dc:creator>
	<dc:creator>Jidin, A.</dc:creator>
	<dc:creator>Sutikno, Tole</dc:creator>
	<dc:description xml:lang="en-US">This paper discusses about design and analysis of double stator slotted rotor (DSSR) BLDC motor for electric bicycle application. Usually single stator (SS) BLDC motor is used in an electric bicycle. This type of motor has low performance and need to be charged regularly. The objective of this research is to design and analysis DSSR motor that have high torque. At starts, design specification for the electric bicycle is calculated. Next, design process for DSSR is carried out by using the desired parameter. Lastly, analysis for double stator slotted rotor is simulated using FEM. Result  for average back emf, average inductance, inner stator flux density, outer stator flux density, average torque and estimate torque constant is obtained. Result for average torque from FEM archieve the requirement of motor torque for DSSR design where the maximum average torque is 16.2 Nm. This research will give benefit to mankind and society in term of environment protection and energy consumption.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/9597</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i1.pp457-464</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 1: March 2018; 457-464</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/9597/11154</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 S. Farina, R.N. Firdaus, F. Azhar, M. Azri, M. S. Ahmad, R. Suhairi, A. Jidin, Tole Sutikno</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>