Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Efficiency comparison of capacitive wireless power transfer for different materials

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 1 (2020) · hlm. 200–212

DOI
10.11591/ijpeds.v11.i1.pp200-212
ISSN
2722-256X, 2088-8694
Terbit
2020-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper describes the application of several types of materials to act as capacitive plates in a Capacitive Power Transfer (CPT) system. In general, the efficiency of CPT system is greatly influenced by the coupling capacitance which is varied by distances and permittivity values. Thus this paper intended to compare the performance of CPT system in terms of the output efficiency for several types of capacitive plates. To be specific, copper plate, zinc, and aluminium are used in this work to act as coupling plates to the CPT system. The CPT system in this work applied class E inverter as it has lowest switching losses among its competitors, i.e. class D and class F. The work is validated through experimental setup of CPT system in which copper material provides the best efficiency of the system.

Jaringan kolaborasi para penulis

39 penulis · 133 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Teknologi MARA
  • Universiti Malaysia Terengganu
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yusmarnita YusopAfiliasi tidak diketahui9
Huzaimah HusinUniversiti Teknikal Malaysia Melaka7
Md Rabiul AwalUniversiti Malaysia Terengganu4
Khairul Kamarudin HasanUniversiti Teknologi MARA4
Yusmarnita YusofUniversiti Teknikal Malaysia Melaka3
Siti Huzaimah HusinUniversiti Teknikal Malaysia Melaka3
Yusmarnita binti YusopUniversiti Teknikal Malaysia Melaka3
Cheok Yan QiUniversiti Teknikal Malaysia Melaka2
Norezmi JamalAfiliasi tidak diketahui2
Thoriq ZaidAfiliasi tidak diketahui2
N. NabilaAfiliasi tidak diketahui2
M.S. M IsaAfiliasi tidak diketahui2
A.A. BasariAfiliasi tidak diketahui2
Y. AzizAfiliasi tidak diketahui2
Zaki MustapaUniversiti Teknikal Malaysia Melaka1
N. X. YinUniversiti Teknikal Malaysia Melaka1
Nor Diyana Md SinUniversiti Teknologi MARA1
R. A. RaniAfiliasi tidak diketahui1
F. K. Abdul RahmanAfiliasi tidak diketahui1
A. A. IsaAfiliasi tidak diketahui1
Amy Sarah NguAfiliasi tidak diketahui1
N. B. AsanAfiliasi tidak diketahui1
Peter Adam HoeherAfiliasi tidak diketahui1
A. A. M. IsaUniversiti Teknikal Malaysia Melaka1
Y. YusmarnitaAfiliasi tidak diketahui1
Masmaria Abdul MajidAfiliasi tidak diketahui1
Mohd Sufian RamliAfiliasi tidak diketahui1
Ahmed Al-HattamiAfiliasi tidak diketahui1
A. H. M. ShapriAfiliasi tidak diketahui1
Ahmad Husni Mohd ShapriAfiliasi tidak diketahui1
Muhammad Zaki bin MustapaAfiliasi tidak diketahui1
Muslimah Meor ShaariAfiliasi tidak diketahui1
Muslimah MeorAfiliasi tidak diketahui1
SK NguangAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Efficiency comparison of capacitive wireless power transfer for different materials</dc:title>
	<dc:creator>Rahman, F. K. A.</dc:creator>
	<dc:creator>Saat, Shakir</dc:creator>
	<dc:creator>Yusop, Y.</dc:creator>
	<dc:creator>Husin, S. H.</dc:creator>
	<dc:creator>Jamaluddin, M. H.</dc:creator>
	<dc:description xml:lang="en-US">This paper describes the application of several types of materials to act as capacitive plates in a Capacitive Power Transfer (CPT) system. In general, the efficiency of CPT system is greatly influenced by the coupling capacitance which is varied by distances and permittivity values. Thus this paper intended to compare the performance of CPT system in terms of the output efficiency for several types of capacitive plates. To be specific, copper plate, zinc, and aluminium are used in this work to act as coupling plates to the CPT system. The CPT system in this work applied class E inverter as it has lowest switching losses among its competitors, i.e. class D and class F. The work is validated through experimental setup of CPT system in which copper material provides the best efficiency of the system.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Universiti Teknikal Malaysia Melaka and Ministry of Education Malaysia under Fundamental Research Grant Scheme (FRGS/1/2016/TK04/FKEKK-CeTRI/F00313)</dc:contributor>
	<dc:date>2020-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/19539</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i1.pp200-212</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 1: March 2020; 200-212</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/19539/13033</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 F. K. A. Rahman, Shakir Saat, Y. Yusop, S. H. Husin, M. H. Jamaluddin</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>