Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Contribution to the Improvement of the Performances of Doubly Fed Induction Machine Functioning in Motor Mode By the DTC Control

International Journal of Power Electronics and Drive Systems · Vol. 8 No. 3 (2017) · hlm. 1117–1127

DOI
10.11591/ijpeds.v8.i3.pp1117-1127
ISSN
2722-256X, 2088-8694
Terbit
2017-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this article, we are interested in the improvement of the performances of Doubly Fed Induction Machine (DFIM) operating in motor mode by the use of the direct torque control (DTC). Firstly, we focused on the modeling of the DFIM and the study of the principle of functioning of the DTC control. Then, we implement this control on the Matlab/Simulink environment. Secondly, we present the simulation results of the proposed control. The analysis of these results shows clearly that the system based on the DFIM studied follows perfectly the set points, what allowed us to justify the efficiency of the elaborate control.

Jaringan kolaborasi para penulis

16 penulis · 49 tautan kepenulisan bersama · 21 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sidi Mohamed Ben Abdellah University
  • Université Moulay Ismail de Meknes
  • Mohamed I University
  • University of Hassan II Casablanca
  • Mohammed V University
  • University of Jijel
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Othmane ZamzoumSidi Mohamed Ben Abdellah University5
Manale BouderbalaSidi Mohamed Ben Abdellah University2
Badre BossoufiSidi Mohamed Ben Abdellah University2
Ahmed LagriouiUniversité Moulay Ismail de Meknes2
Hala Alami AroussiMohamed I University2
Yasmine IhedraneSidi Mohamed Ben Abdellah University1
Hamid ChojaaSidi Mohamed Ben Abdellah University1
Tahar HallabiUniversity of Hassan II Casablanca1
Mohammed TaoussiAfiliasi tidak diketahui1
Salaheddine RhailiMohammed V University1
Oussama BoulkhrachefUniversity of Jijel1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Contribution to the Improvement of the Performances of Doubly Fed Induction Machine Functioning in Motor Mode By the DTC Control</dc:title>
	<dc:creator>EL Ouanjli, Najib</dc:creator>
	<dc:creator>Derouich, Aziz</dc:creator>
	<dc:creator>El Ghzizal, Abdelaziz</dc:creator>
	<dc:creator>El Mourabit, Youness</dc:creator>
	<dc:creator>Taoussi, Mohammed</dc:creator>
	<dc:description xml:lang="en-US">In this article, we are interested in the improvement of the performances of Doubly Fed Induction Machine (DFIM) operating in motor mode by the use of the direct torque control (DTC). Firstly, we focused on the modeling of the DFIM and the study of the principle of functioning of the DTC control. Then, we implement this control on the Matlab/Simulink environment. Secondly, we present the simulation results of the proposed control. The analysis of these results shows clearly that the system based on the DFIM studied follows perfectly the set points, what allowed us to justify the efficiency of the elaborate control.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2017-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8361</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v8.i3.pp1117-1127</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 8, No 3: September 2017; 1117-1127</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v8.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8361/7009</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 Najib EL Ouanjli, Aziz Derouich, Abdelaziz El Ghzizal, Youness El Mourabit, Mohammed Taoussi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>