Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Control of Pole-Climbing Robot Orientation using Self-Tuning Method

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 3 (2018) · hlm. 1029–1037

DOI
10.11591/ijpeds.v9.i3.pp1029-1037
ISSN
2722-256X, 2088-8694
Terbit
2018-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper describes the method to control a hybrid robot whose main task is to climb a pole to place an object on the top of the pole. The hybrid pole-climbing robot considered in this paper uses 2 Planetary PG36 DC-motors as actuators and an external rotary encoder sensor to provide a feedback on the change in robot orientation during the climbing movement. The orientation control of the pole-climbing robot using self-tuning method has been realized by identifying the transfer function of the actuator system under consideration, being followed with the calculation of control parameters using the self-tuning pole-placement method, and furthermore being implemented on the external rotary encoder sensor. Self-tuning pole-placement method has been explored to control the parameters q0, q1, q2, and p1 of the controller. The experiments were done on a movement path in a form of a cylindrical pole. The first experiment was done based one the change in rotation angle of the rotary sensor with the angle values greater than 50˚ in the positive direction, whereas the second experiment was done with the angle values greater than -50˚ in the negative direction. The experiment results show that the control of the robot under consideration could maintain its original position at the time of angle change disturbance and that the robot could climb in a straight direction within the specified tolerance of orientation angle change.

Jaringan kolaborasi para penulis

34 penulis · 113 tautan kepenulisan bersama · 77 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Universiti Teknologi MARA
  • Universitas Darul Ulum
  • University of Malaya
  • Universiti Malaysia Perlis
  • California Polytechnic State University
  • Universitas Airlangga
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hadi SuyonoUniversity of Brawijaya8
Taufik TaufikCalifornia Polytechnic State University4
Machrus AliUniversitas Darul Ulum2
Aji Akbar FirdausUniversitas Airlangga2
Ismail MusirinUniversiti Teknologi MARA2
Tri NurwatiUniversity of Brawijaya2
Soeprapto SoepraptoUniversity of Brawijaya2
Sidik NurcahyoPoliteknik Negeri Malang2
P paramita Dwi PutriAfiliasi tidak diketahui1
Hidayatul NurohmahUniversitas Darul Ulum1
Dimas Fajar Uman PutraInstitut Teknologi Sepuluh Nopember1
Hamzah ArofUniversity of Malaya1
Saiful Izwan SulimanUniversiti Teknologi MARA1
Mohamed ZellaguiUniversity of Batna 11
Muhamad Hazim LokmanUniversiti Teknologi MARA1
Sharifah Azma Syed MustafaUniversiti Teknologi MARA1
Hazlie MokhlisUniversity of Malaya1
Rizki Mendung AriefiantoUniversity of Brawijaya1
Eduard MuljadiAuburn University1
Tole SutiknoUniversitas Ahmad Dahlan1
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis1
Muhammad Gul E. IslamAfiliasi tidak diketahui1
Shahrin Md AyobUniversity of Technology Malaysia1
Azralmukmin AzmiUniversiti Malaysia Perlis1
Hendri MasdiUniversitas Negeri Padang1
Yosi Dwi HandariUniversity of Brawijaya1
Eka MaulanaUniversity of Brawijaya1
Aditya Bagus SetyawanUniversity of Brawijaya1
Muhammad Ruswandi DjalalPoliteknik Negeri Ujung Pandang1
‪Yanuar Mahfudz Safarudin‬Politeknik Negeri Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Control of Pole-Climbing Robot Orientation using Self-Tuning Method</dc:title>
	<dc:creator>Aziz Muslim, Muhammad</dc:creator>
	<dc:creator>Dwi Nusantoro, Goegoes</dc:creator>
	<dc:creator>Nur Hasanah, Rini</dc:creator>
	<dc:creator>Hasyim Asy’ari, Mokhammad</dc:creator>
	<dc:description xml:lang="en-US">This paper describes the method to control a hybrid robot whose main task is to climb a pole to place an object on the top of the pole. The hybrid pole-climbing robot considered in this paper uses 2 Planetary PG36 DC-motors as actuators and an external rotary encoder sensor to provide a feedback on the change in robot orientation during the climbing movement. The orientation control of the pole-climbing robot using self-tuning method has been realized by identifying the transfer function of the actuator system under consideration, being followed with the calculation of control parameters using the self-tuning pole-placement method, and furthermore being implemented on the external rotary encoder sensor. Self-tuning pole-placement method has been explored to control the parameters q0, q1, q2, and p1 of the controller. The experiments were done on a movement path in a form of a cylindrical pole. The first experiment was done based one the change in rotation angle of the rotary sensor with the angle values greater than 50˚ in the positive direction, whereas the second experiment was done with the angle values greater than -50˚ in the negative direction. The experiment results show that the control of the robot under consideration could maintain its original position at the time of angle change disturbance and that the robot could climb in a straight direction within the specified tolerance of orientation angle change.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/14348</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i3.pp1029-1037</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 3: September 2018; 1029-1037</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/14348/11299</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Muhammad Aziz Muslim, Goegoes Dwi Nusantoro, Rini Nur Hasanah, Mokhammad Hasyim Asy’ari</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>