Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Parameters observation of restoration capacity of industrial lead acid battery using high current pulses

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 3 (2020) · hlm. 1596–1602

DOI
10.11591/ijpeds.v11.i3.pp1596-1602
ISSN
2722-256X, 2088-8694
Terbit
2020-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Batteries play an essential role on most of the electrical equipment and electrical engineering tools. However, one of the drawbacks of lead acid batteries is PbSO4 accumulates on the battery plates, which significantly cause deterioration. Therefore, this study discusses the discharge capacity performance evaluation of the industrial lead acid battery. The selective method to improve the discharge capacity is using high current pulses method. This method is performed to restore the capacity of lead acid batteries that use a maximum direct current (DC) of up to 500 A produces instantaneous heat from 27°C to 48°C to dissolve the PbSO4 on the plates. This study uses an 840 Ah, 36 V flooded lead acid batteries for a forklift for the evaluation test. Besides, this paper explores the behavior of critical formation parameters, such as the discharge capacity of the cells. From the experimental results, it can be concluded that the discharge capacity of the flooded lead acid battery can be increase by using high current pulses method. The comparative findings for the overall percentage of discharge capacity of the batteries improved from 68% to 99% after the restoration capacity.

Jaringan kolaborasi para penulis

40 penulis · 150 tautan kepenulisan bersama · 16 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Universiti Teknikal Malaysia Melaka
  • Universiti Putra Malaysia
  • University of Engineering and Technology Taxila
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
A. N. KasiranTun Hussein Onn University of Malaysia5
Nor Akmal Mohd JamailTun Hussein Onn University of Malaysia3
Mohd Fairouz Mohd YousofTun Hussein Onn University of Malaysia3
M. H. YatimTun Hussein Onn University of Malaysia3
H. AhmadTun Hussein Onn University of Malaysia2
M. S. KamarudinTun Hussein Onn University of Malaysia2
Nordiana Azlin OthmanTun Hussein Onn University of Malaysia2
Salem Mgammal Al-AmeriTun Hussein Onn University of Malaysia2
Afarulrazi Abu BakarTun Hussein Onn University of Malaysia2
N.A.M. HasniTun Hussein Onn University of Malaysia1
Mohd Syahidie KamaruddinTun Hussein Onn University of Malaysia1
S.S. RidzwanTun Hussein Onn University of Malaysia1
Nurul Nabilah Mad SiamTun Hussein Onn University of Malaysia1
Mohd Hafizie YatimTun Hussein Onn University of Malaysia1
Nor Azmira Che IbrahimTun Hussein Onn University of Malaysia1
Asmawi Md YunosTun Hussein Onn University of Malaysia1
Rosli OmarTun Hussein Onn University of Malaysia1
Che Ku Nor Azie Hailma Che Ku MelorTun Hussein Onn University of Malaysia1
Ariffuddin JoretTun Hussein Onn University of Malaysia1
Maryanti RazaliTun Hussein Onn University of Malaysia1
Muhammad Suhaimi SulongTun Hussein Onn University of Malaysia1
Zainab ZainalTun Hussein Onn University of Malaysia1
Matiullah AhsanTun Hussein Onn University of Malaysia1
Md Nor Ramdon BaharomTun Hussein Onn University of Malaysia1
Omar Abu HassanTun Hussein Onn University of Malaysia1
Faridah HanimAfiliasi tidak diketahui1
Rizwanullah KhanTun Hussein Onn University of Malaysia1
Norhafiz B. AzisUniversiti Putra Malaysia1
Asjad AliUniversity of Engineering and Technology Taxila1
Hidayat ZainuddinUniversiti Teknikal Malaysia Melaka1
Sharin Ab GhaniUniversiti Teknikal Malaysia Melaka1
Nurul Farahwahida Md YasidTun Hussein Onn University of Malaysia1
M.U. WahyuAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Parameters observation of restoration capacity of industrial lead acid battery using high current pulses</dc:title>
	<dc:creator>Ibrahim, N. S. M.</dc:creator>
	<dc:creator>Ponniran, Asmarashid</dc:creator>
	<dc:creator>Rahman, R. A.</dc:creator>
	<dc:creator>Martin, M. P.</dc:creator>
	<dc:creator>Yassin, A.</dc:creator>
	<dc:creator>Eahambram, A.</dc:creator>
	<dc:creator>Aziz, M. H.</dc:creator>
	<dc:description xml:lang="en-US">Batteries play an essential role on most of the electrical equipment and electrical engineering tools. However, one of the drawbacks of lead acid batteries is PbSO4 accumulates on the battery plates, which significantly cause deterioration. Therefore, this study discusses the discharge capacity performance evaluation of the industrial lead acid battery. The selective method to improve the discharge capacity is using high current pulses method. This method is performed to restore the capacity of lead acid batteries that use a maximum direct current (DC) of up to 500 A produces instantaneous heat from 27°C to 48°C to dissolve the PbSO4 on the plates. This study uses an 840 Ah, 36 V flooded lead acid batteries for a forklift for the evaluation test. Besides, this paper explores the behavior of critical formation parameters, such as the discharge capacity of the cells. From the experimental results, it can be concluded that the discharge capacity of the flooded lead acid battery can be increase by using high current pulses method. The comparative findings for the overall percentage of discharge capacity of the batteries improved from 68% to 99% after the restoration capacity.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20816</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i3.pp1596-1602</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 3: September 2020; 1596-1602</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20816/13209</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 N. S. M. Ibrahim, Asmarashid Ponniran, R. A. Rahman, M. P. Martin, A. Yassin, A. Eahambram, M. H. Aziz</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>