Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Selection of Power Semiconductor Switches in Modified Half Bridge Resonant Inverter Fitted Induction Heater in Power Line for Less Harmonic Injection

International Journal of Power Electronics and Drive Systems · Vol. 6 No. 1 (2015) · hlm. 121–128

DOI
10.11591/ijpeds.v6.i1.pp121-128
ISSN
2722-256X, 2088-8694
Terbit
2015-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents an approach to minimize the harmonics contained in the input current of single phase Modified Half Bridge Resonant inverter fitted induction heating equipment. A switch like IGBT, GTO, and MOSFET are used for this purpose. It analyzes the harmonics or noise content in the sinusoidal input current of this inverter. Fourier Transform has been used to distinguish between the fundamental and the harmonics, as it is a better investigative tool for an unknown signal in the frequency domain. An exhaustive method for the selection of different power semiconductor switches for Modified Half Bridge Resonant inverter fed induction heater is presented. Heating coil of the induction heater is made of litz wire which reduces the skin effect and proximity effect at high operating frequency. With the calculated optimum values of input current of the system at a particular operating frequency, Modified Half Bridge Resonant inverter topology has been simulated using P-SIM software. To obtain the Input current waveforms through it, further analysis has been employed. From this analysis selection of suitable power semiconductor switches like IGBT, GTO and MOSFET are made. Waveforms have been shown to justify the feasibility for real implementation of single phase Modified Half Bridge Resonant inverter fed induction heater in industrial application.

Jaringan kolaborasi para penulis

28 penulis · 66 tautan kepenulisan bersama · 29 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indian Institute of Technology Dhanbad
  • Saroj Mohan Institute of Technology
  • Techno India Group (India)
  • National Institute of Technology Meghalaya
  • University of Burdwan
  • KIIT University
  • Maulana Abul Kalam Azad University of Technology, West Bengal
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Avijit ChakrabortyIndian Institute of Technology Dhanbad10
Kallol BhaumikSaroj Mohan Institute of Technology6
Alok Kumar ShrivastavTechno India Group (India)5
Ankur GangulyTechno India Group (India)4
Saumen DharaSaroj Mohan Institute of Technology2
Sourish SanyalAfiliasi tidak diketahui2
Debabrata RoyAfiliasi tidak diketahui2
Himanshu SharmaIndian Institute of Technology Dhanbad2
Yaduvir SinghIndian Institute of Technology Dhanbad2
Soumya DasUniversity of Burdwan2
Gourav MajumdarKIIT University2
Saswata MukherjeeMaulana Abul Kalam Azad University of Technology, West Bengal2
Arijit ChakrabartiIndian Institute of Technology Dhanbad2
Titas Kumar NagAfiliasi tidak diketahui2
Niladri DasIndian Institute of Technology Dhanbad1
Moumita SadhuAfiliasi tidak diketahui1
Suprava ChakrabortyAfiliasi tidak diketahui1
Kaushik NeogiAfiliasi tidak diketahui1
Atanu BanerjeeNational Institute of Technology Meghalaya1
Pritish Kumar GhoshAfiliasi tidak diketahui1
Amarnath SanyalAfiliasi tidak diketahui1
Atif IqbalQatar University1
Ahmed RiyazIndian Institute of Technology Dhanbad1
Md Abdullah AnsariAix-Marseille Université1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Selection of Power Semiconductor Switches in Modified Half Bridge Resonant Inverter Fitted Induction Heater in Power Line for Less Harmonic Injection</dc:title>
	<dc:creator>Sadhu, Pradip Kumar</dc:creator>
	<dc:creator>Pal, Palash</dc:creator>
	<dc:creator>Pal, Nitai</dc:creator>
	<dc:creator>Sanyal, Sourish</dc:creator>
	<dc:description xml:lang="en-US">This paper presents an approach to minimize the harmonics contained in the input current of single phase Modified Half Bridge Resonant inverter fitted induction heating equipment. A switch like IGBT, GTO, and MOSFET are used for this purpose. It analyzes the harmonics or noise content in the sinusoidal input current of this inverter. Fourier Transform has been used to distinguish between the fundamental and the harmonics, as it is a better investigative tool for an unknown signal in the frequency domain. An exhaustive method for the selection of different power semiconductor switches for Modified Half Bridge Resonant inverter fed induction heater is presented. Heating coil of the induction heater is made of litz wire which reduces the skin effect and proximity effect at high operating frequency. With the calculated optimum values of input current of the system at a particular operating frequency, Modified Half Bridge Resonant inverter topology has been simulated using P-SIM software. To obtain the Input current waveforms through it, further analysis has been employed. From this analysis selection of suitable power semiconductor switches like IGBT, GTO and MOSFET are made. Waveforms have been shown to justify the feasibility for real implementation of single phase Modified Half Bridge Resonant inverter fed induction heater in industrial application.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2015-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5108</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v6.i1.pp121-128</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 6, No 1: March 2015; 121-128</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v6.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5108/4558</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2015 Pradip Kumar Sadhu, Palash Pal, Nitai Pal, Sourish Sanyal</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>