Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Real-time implementation and comparative analysis of fault-tolerant control strategies for induction motor drives

International Journal of Power Electronics and Drive Systems · Vol. 17 No. 2 (2026) · hlm. 894–907

DOI
10.11591/ijpeds.v17.i2.pp894-907
ISSN
2722-256X, 2088-8694
Terbit
2026-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

For nearly five decades, the induction motor has been the most widely used electrical machine in industry due to its robustness, simplicity, and low cost, supported by advances in power electronics enabling effective performance control. While DC motors were previously favored for their ease of speed and torque regulation, induction motors have gained prominence because they do not require brushes and involve fewer wear-prone components, resulting in reduced maintenance and improved reliability. Consequently, they are widely employed in industrial applications and emerging fields such as electric and hybrid vehicles. This study presents a comparative analysis of two fault-tolerant control (FTC) strategies: field-oriented control (FOC) and direct torque control (DTC). The evaluation focuses on sensitivity to parameter variations, dynamic performance, and steady-state behavior. Both strategies, classified under vector control techniques, are implemented in real time using a dSPACE platform to control an induction motor under an open-circuit fault in a two-level inverter. Results demonstrate that the DTC-based FTC approach offers superior robustness and stability compared to the IFOC-based method, particularly under fault conditions, load disturbances, and speed variations.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 37 tautan kepenulisan bersama · 10 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Université Mustapha Stambouli de Mascara
  • Université des Sciences et de la Technologie d'Oran Mohamed Boudiaf
  • École Nationale Polytechnique d'Oran
  • University of Bechar
  • Université de Bretagne Occidentale
  • University of Science and Technology
  • Renewable Energy Development Center
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Abdelghani ChahmiAfiliasi tidak diketahui2
Bertrand RaisonAfiliasi tidak diketahui2
Mohamed BenbouzidUniversité de Bretagne Occidentale2
Dris AhmedÉcole Nationale Polytechnique d'Oran2
Belaidi AEKÉcole Nationale Polytechnique d'Oran2
Mansouri FatimaZohraAfiliasi tidak diketahui1
Benyounès MazariUniversity of Science and Technology1
Youssef MouloudiUniversity of Bechar1
Harici OtmaneUniversity of Bechar1
Dahhou BrahimUniversité des Sciences et de la Technologie d'Oran Mohamed Boudiaf1
Salah LachtarRenewable Energy Development Center1
Houaria AbdelliAfiliasi tidak diketahui1
Abdelkader MezouarAfiliasi tidak diketahui1
Kheira BelgacemAfiliasi tidak diketahui1
Abderrahmane HamimedAfiliasi tidak diketahui1
Tewfik A. OualidUniversité Mustapha Stambouli de Mascara1
Benyekhlef BenaminaUniversité Mustapha Stambouli de Mascara1
Kaddour MiloudiUniversité Mustapha Stambouli de Mascara1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Real-time implementation and comparative analysis of fault-tolerant control strategies for induction motor drives</dc:title>
	<dc:creator>Hammou, Asmaa</dc:creator>
	<dc:creator>Bendjebbar, Mokhtar</dc:creator>
	<dc:creator>Benslimane, Mohammed</dc:creator>
	<dc:subject xml:lang="en-US">direct torque control DTC; DS1104; fault-tolerant control; indirect field-oriented control; induction motor</dc:subject>
	<dc:description xml:lang="en-US">For nearly five decades, the induction motor has been the most widely used electrical machine in industry due to its robustness, simplicity, and low cost, supported by advances in power electronics enabling effective performance control. While DC motors were previously favored for their ease of speed and torque regulation, induction motors have gained prominence because they do not require brushes and involve fewer wear-prone components, resulting in reduced maintenance and improved reliability. Consequently, they are widely employed in industrial applications and emerging fields such as electric and hybrid vehicles. This study presents a comparative analysis of two fault-tolerant control (FTC) strategies: field-oriented control (FOC) and direct torque control (DTC). The evaluation focuses on sensitivity to parameter variations, dynamic performance, and steady-state behavior. Both strategies, classified under vector control techniques, are implemented in real time using a dSPACE platform to control an induction motor under an open-circuit fault in a two-level inverter. Results demonstrate that the DTC-based FTC approach offers superior robustness and stability compared to the IFOC-based method, particularly under fault conditions, load disturbances, and speed variations.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2026-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24480</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v17.i2.pp894-907</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 17, No 2: June 2026; 894-907</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v17.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24480/15221</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Asmaa Hammou, Mokhtar Bendjebbar, Mohammed Benslimane</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>