Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Control for induction motor drives using predictive model stator currents and speeds control

International Journal of Power Electronics and Drive Systems · Vol. 13 No. 4 (2022) · hlm. 2005–2013

DOI
10.11591/ijpeds.v13.i4.pp2005-2013
ISSN
2722-256X, 2088-8694
Terbit
2022-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper is presented for designing a new controller using the predictive model current and speed control method for the asynchronous motor. This control method is based on traditional predictive controller development to have a cascade structure similar to the rotor flux control (field-oriented control) and direct torque control (DTC). Therefore, this control method will have two control loops. Both inner and outer loop controllers use predictive power. The outer ring is speed control, while the internal circle is stator current control. The inner loop is based on the finite control set – model predictive control (FCS-MPC), while the outer ring to take full advantage of the high dynamic response of the inner circle uses the deadbeat MPC. MATLAB simulation results show that this control method has performance equivalent to traditional controllers while minimizing overshoot and having fast, on-demand response times.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 28 tautan kepenulisan bersama · 23 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Economics - Technology for Industries
  • Hanoi University of Science and Technology
  • University of Transport and Communications
  • Electric Power University
  • Hung Yen University of Technology and Education
  • Vinh University of Technology Education
  • Thai Nguyen University of Technology
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Vo Thu HàUniversity of Economics - Technology for Industries3
Nguyen Tung LamHanoi University of Science and Technology2
Vo Quang VinhElectric Power University2
Nguyen Thi ThanhUniversity of Economics - Technology for Industries1
Thân Thị ThươngUniversity of Economics - Technology for Industries1
Nguyen Phung QuangHanoi University of Science and Technology1
Le Trong TanHanoi University of Science and Technology1
Nguyen Duc NamHanoi University of Science and Technology1
Le Ngoc TrucHung Yen University of Technology and Education1
Nguyen Hong QuangThai Nguyen University of Technology1
Pham Van TuanVinh University of Technology Education1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Control for induction motor drives using predictive model stator currents and speeds control</dc:title>
	<dc:creator>Ha, Vo Thanh</dc:creator>
	<dc:creator>Giang, Pham Thi</dc:creator>
	<dc:subject xml:lang="en-US">Direct torque control; Field-oriented control; Induction motor; Model predictive control; PI</dc:subject>
	<dc:description xml:lang="en-US">This paper is presented for designing a new controller using the predictive model current and speed control method for the asynchronous motor. This control method is based on traditional predictive controller development to have a cascade structure similar to the rotor flux control (field-oriented control) and direct torque control (DTC). Therefore, this control method will have two control loops. Both inner and outer loop controllers use predictive power. The outer ring is speed control, while the internal circle is stator current control. The inner loop is based on the finite control set – model predictive control (FCS-MPC), while the outer ring to take full advantage of the high dynamic response of the inner circle uses the deadbeat MPC. MATLAB simulation results show that this control method has performance equivalent to traditional controllers while minimizing overshoot and having fast, on-demand response times.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22053</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v13.i4.pp2005-2013</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 13, No 4: December 2022; 2005-2013</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v13.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22053/13992</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Vo Thanh Ha, Pham Thi Giang</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>