This paper deals with a boost dc-dc converter for fuel cell application. In fuel cell electric vehicles application, a high power boost dc-dc converter is adopted to adjust the output voltage, current and power of fuel cell engine to meet the vehicle requirements. One of challenge in designing a boost converter for high power application is how to handle the high current at the input side. In this paper an interleaved boost dc-dc converter is proposed for current sharing on high power application. Moreover, this converter also reduces the fuel ripple current. Performance of the interleaved boost converter is tested through simulation and experimental results.Keywords: component; Interleaved Boost Converter; Fuel Cell Electric Vehicle; high power application.DOI: http://dx.doi.org/10.11591/ijpeds.v1i2.126
Jaringan kolaborasi para penulis
14 penulis ·
30 tautan kepenulisan bersama
· 8 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Lampung University
Universitas Ahmad Dahlan
State University of Semarang
University of Technology Malaysia
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.