Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Reduction of Cogging Torque by Adapting Bifurcated Stator Slots and Minimization Of Harmonics And Torque Ripple in Brushless DC Motor

International Journal of Power Electronics and Drive Systems · Vol. 7 No. 3 (2016) · hlm. 781–789

DOI
10.11591/ijpeds.v7.i3.pp781-789
ISSN
2722-256X, 2088-8694
Terbit
2016-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper proposes an improved methodology to minimize the cogging torque, harmonics and torque ripples in Brushless DC (BLDC) motor. The cogging torque is reduced by designing the BLDC motor with bifurcated active surface area using Finite Element Analysis (FEA). The harmonics and torque ripple is minimized using PI and Fuzzy controllers. These controllers are analyzed to bring out an optimal solution. The effectiveness and flexibility of the individual techniques of proposed control method is verified through simulations [Matlab Simulink]. The experimental result is shown only for fuzzy control because fuzzy is better comparing the performance of PI controllers.

Jaringan kolaborasi para penulis

28 penulis · 92 tautan kepenulisan bersama · 22 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • SRM Institute of Science and Technology
  • SRM University
  • Ford Motor Company (United States)
  • National University of Singapore
  • Nanyang Technological University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
S. VidyasagarSRM Institute of Science and Technology5
R. PalanisamySRM Institute of Science and Technology3
Krishnasamy VijayakumarSRM Institute of Science and Technology3
K. SelvakumarSRM Institute of Science and Technology2
D. KarthikeyanSRM Institute of Science and Technology2
S. VijayakumarFord Motor Company (United States)2
K. Sathiah KannanFord Motor Company (United States)2
A. Jamal MohideenFord Motor Company (United States)2
N.D. Balaji SairamFord Motor Company (United States)2
Sayantan BhattacharjeeSRM University2
Maulik TiwariSRM University2
Devashish VashishthaSRM University2
R. SridharSRM Institute of Science and Technology1
T. GunasekharAfiliasi tidak diketahui1
D. MeenuAfiliasi tidak diketahui1
M. AnushaAfiliasi tidak diketahui1
S. George FernandezSRM Institute of Science and Technology1
P. SureshSRM Institute of Science and Technology1
Vaidheeswaran ArchanaNational University of Singapore1
Soham ChatterjeeNanyang Technological University1
D. SelvabharathiSRM Institute of Science and Technology1
D. SattianadanSRM Institute of Science and Technology1
Deepak Kumar NayakSRM Institute of Science and Technology1
Roopam JhaSRM Institute of Science and Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Reduction of Cogging Torque by Adapting Bifurcated Stator Slots and Minimization Of Harmonics And Torque Ripple in Brushless DC Motor</dc:title>
	<dc:creator>Doss, M. Arun Noyal</dc:creator>
	<dc:creator>Mohanraj, K.</dc:creator>
	<dc:creator>Kalyanasundaram, V.</dc:creator>
	<dc:creator>Karthik, K.</dc:creator>
	<dc:description xml:lang="en-US">This paper proposes an improved methodology to minimize the cogging torque, harmonics and torque ripples in Brushless DC (BLDC) motor. The cogging torque is reduced by designing the BLDC motor with bifurcated active surface area using Finite Element Analysis (FEA). The harmonics and torque ripple is minimized using PI and Fuzzy controllers. These controllers are analyzed to bring out an optimal solution. The effectiveness and flexibility of the individual techniques of proposed control method is verified through simulations [Matlab Simulink]. The experimental result is shown only for fuzzy control because fuzzy is better comparing the performance of PI controllers.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2016-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5259</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v7.i3.pp781-789</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 7, No 3: September 2016; 781-789</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v7.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5259/5480</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 M. Arun Noyal Doss, K. Mohanraj, V. Kalyanasundaram, K. Karthik</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>