Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Three-Phase Three-Level Soft Switching Dc-Dc Converter for Industrial Applications

International Journal of Power Electronics and Drive Systems · Vol. 8 No. 2 (2017) · hlm. 785–794

DOI
10.11591/ijpeds.v8.i2.pp785-794
ISSN
2722-256X, 2088-8694
Terbit
2017-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In high power DC applications, the single-phase DC-DC converter will face large voltage and current stress in each control switch and thereby the power handling capacity is less. To overcome this problem, three-phase DC-DC converter is used and it is suitable for high power applications with reduced number of switches as compared with the conventional topologies. The asymmetrical duty cycle control is considered to operate the switches under soft switching and hence the switching losses are reduced. The transformer leakage inductances are used along with junction capacitances in order to form resonance and hence ZVS commutation is possible in a wider load range. The modified phase shift control method is used for the proposed converter.The operational modes and design equations of the proposed converter have been observed. The simulation is carried out with a load of 1000W for validating the proposed work.

Jaringan kolaborasi para penulis

13 penulis · 17 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Jawaharlal Nehru Technological University Anantapur
  • Koneru Lakshmaiah Education Foundation
  • Prasad V. Potluri Siddhartha Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
S. Nagaraja RaoJawaharlal Nehru Technological University Anantapur3
D. V. Ashok KumarJawaharlal Nehru Technological University Anantapur3
A. Purna Chandra RaoPrasad V. Potluri Siddhartha Institute of Technology2
J. Surya KumariAfiliasi tidak diketahui1
Gummadi Srinivasa RaoAfiliasi tidak diketahui1
Y. KusumalathaAfiliasi tidak diketahui1
Ch SaibabuAfiliasi tidak diketahui1
Venu Madhav GopalaAfiliasi tidak diketahui1
J. Sivavara PrasadAfiliasi tidak diketahui1
Y.P. ObeleshAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Three-Phase Three-Level Soft Switching Dc-Dc Converter for Industrial Applications</dc:title>
	<dc:creator>Prasad, J. Sivavara</dc:creator>
	<dc:creator>Obulesh, Y.P.</dc:creator>
	<dc:creator>Sai Babu, Ch.</dc:creator>
	<dc:description xml:lang="en-US">In high power DC applications, the single-phase DC-DC converter will face large voltage and current stress in each control switch and thereby the power handling capacity is less. To overcome this problem, three-phase DC-DC converter is used and it is suitable for high power applications with reduced number of switches as compared with the conventional topologies. The asymmetrical duty cycle control is considered to operate the switches under soft switching and hence the switching losses are reduced. The transformer leakage inductances are used along with junction capacitances in order to form resonance and hence ZVS commutation is possible in a wider load range. The modified phase shift control method is used for the proposed converter.The operational modes and design equations of the proposed converter have been observed. The simulation is carried out with a load of 1000W for validating the proposed work.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2017-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/6765</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v8.i2.pp785-794</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 8, No 2: June 2017; 785-794</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v8.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/6765/6402</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 J. Sivavara Prasad, Y.P. Obulesh, Ch. Sai Babu</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>