Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and simulation of Lidar based control system for wind turbine

International Journal of Power Electronics and Drive Systems · Vol. 12 No. 1 (2021) · hlm. 542–550

DOI
10.11591/ijpeds.v12.i1.pp542-550
ISSN
2722-256X, 2088-8694
Terbit
2021-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Renewable energy sources could be the main contributor to fulfilling the world’s energy requirement. Wind energy is grabbing the world’s attention due to its abundant nature and reliability. Wind energy is a prominent renewable energy source due to its availability and higher reliability. Despite the aforementioned benefits, there are some challenges such as wind measurement and prediction due to the turbulent nature of the wind. Lidar (light detection and ranging) technology is used in wind turbines to preview the wind and act it accordingly. Wind speed along with the direction is measured by the Lidar before it reaches the wind turbine plane and the control system of the wind turbine utilizes this data for optimal results. It enhances the control system along with it optimizes the output power. This paper presents the Lidar simulation model, which previews the wind earlier than the conventional feedback method. The Lidar simulation model is prepared and implemented on the horizontal axis wind turbine. The simulation is performed in GH Bladed at a 2.0 MW wind turbine. The output results are analyzed with the former method. The power extracted, pitch angle, rotor torque obtained from the proposed methodology proves its efficacy.

Kata kunci

Jaringan kolaborasi para penulis

27 penulis · 71 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Ferghana Polytechnical Institute
  • Ecole Nationale d'Ingénieurs de Monastir
  • North China Electric Power University
  • Sukkur IBA University
  • University of Cross River State
  • University of Calabar
  • University of Oulu
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Armstrong O. NjokUniversity of Cross River State2
Med Faouzi MimouniEcole Nationale d'Ingénieurs de Monastir2
Ramzi TrabelsiAfiliasi tidak diketahui2
Jerry KumarNorth China Electric Power University2
Nanik Ram ParhyarBeijing Institute of Technology2
Julie C. OgbulezieUniversity of Calabar1
Suresh Kumar PanjwaniUniversity of Oulu1
Joel IlokeUniversity of Cross River State1
Mangi Fareed HussainSukkur IBA University1
Anissa HosseyniAfiliasi tidak diketahui1
Sanjeeve KumarAfiliasi tidak diketahui1
Ramzi TrabelsiEcole Nationale d'Ingénieurs de Monastir1
Anissa HosseyniaEcole Nationale d'Ingénieurs de Monastir1
Med Faouzi MimouniaEcole Nationale d'Ingénieurs de Monastir1
Hamdi EcheikhEcole Nationale d'Ingénieurs de Monastir1
R AlammariAfiliasi tidak diketahui1
Usmonov Shukurillo YulbarsovichFerghana Polytechnical Institute1
Adeel SaleemFerghana Polytechnical Institute1
Ilkhombek KholiddinovFerghana Polytechnical Institute1
Mirsoli UzbekovFerghana Polytechnical Institute1
Eraliev Khojiakbar Abdinabi ugliFerghana Polytechnical Institute1
Mamadaliev Musulmonkul Imomali UgliFerghana Polytechnical Institute1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design and simulation of Lidar based control system for wind turbine</dc:title>
	<dc:creator>Iqbal, Atif</dc:creator>
	<dc:creator>Ying, Deng</dc:creator>
	<dc:creator>Akhter, Faheem</dc:creator>
	<dc:creator>Panjwani, Manoj Kumar</dc:creator>
	<dc:creator>Khan, Danish</dc:creator>
	<dc:subject xml:lang="en-US">Control system, Lidar, Power output, Wind turbines</dc:subject>
	<dc:description xml:lang="en-US">Renewable energy sources could be the main contributor to fulfilling the world’s energy requirement. Wind energy is grabbing the world’s attention due to its abundant nature and reliability. Wind energy is a prominent renewable energy source due to its availability and higher reliability. Despite the aforementioned benefits, there are some challenges such as wind measurement and prediction due to the turbulent nature of the wind. Lidar (light detection and ranging) technology is used in wind turbines to preview the wind and act it accordingly. Wind speed along with the direction is measured by the Lidar before it reaches the wind turbine plane and the control system of the wind turbine utilizes this data for optimal results. It enhances the control system along with it optimizes the output power. This paper presents the Lidar simulation model, which previews the wind earlier than the conventional feedback method. The Lidar simulation model is prepared and implemented on the horizontal axis wind turbine. The simulation is performed in GH Bladed at a 2.0 MW wind turbine. The output results are analyzed with the former method. The power extracted, pitch angle, rotor torque obtained from the proposed methodology proves its efficacy.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21191</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v12.i1.pp542-550</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 12, No 1: March 2021; 542-550</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v12.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21191/13374</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Atif Iqbal, Deng Ying, Faheem Akhter, Manoj Kumar Panjwani, Danish Khan</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>