This paper presents discontinuous space vector PWM (DPWM) techniques for a seven-phase voltage source inverter (VSI). Space vector model of a seven-phase VSI shows that there exist 128 space vectors with different lengths and maps into fourteen sided polygons. A number of possibilities could arise to implement modulation of inverter legs due to large number of available space voltage vectors. Two strategies are adopted here; one utilising large and two middle sets of space vectors to implement discontinuous space vector PWM. Clamping of legs of inverter to either positive or negative dc bus leads to discontinuity in the switching and consequently offers reduced switching loss modulation strategy. A significant reduction in switching losses can be achieved while employing DPWM in a seven-phase VSI. A generalised method is also proposed to realize the DPWM in a seven-phase VSI. Comparison of continuous and discontinuous PWM is presented in terms of switching current ripple. The experimental set-up is illustrated and the experimental results are presented.DOI: http://dx.doi.org/10.11591/ijpeds.v2i2.244
Jaringan kolaborasi para penulis
9 penulis ·
13 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
National Institute of Technology Hamirpur
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.