Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Induction Motor Speed Control Using Indirect Z-source Matrix Converter with PSO-PI Controller under Various Break Conditions

International Journal of Power Electronics and Drive Systems · Vol. 3 No. 1 (2013) · hlm. 41–52

ISSN
2722-256X, 2088-8694
Terbit
2013-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Since induction motors are preferred over direct current machines in the view of cost and simplicity, they have widely been used in industry. In this paper, the speed of the three-phase induction motor has been controlled using an indirect z-source matrix converter. The method used for this purpose is flux control keeping the V/f ratio and regulating slippage. The effect of flux changes and reference velocity in this method has been taken into consideration and various electric break methods on the motor have been studied accordingly. Coefficients of PI controllers have been obtained in the proposed system for desirable response by PSO Algorithm. The proposed system with the respective converter has been simulated in SIMULINK environment using the information of an induction machine by MATLAB Software. The results show to using the proposed system and indirect z-source matrix converter, appropriate velocity and desirable torque are obtained in a short time. DOI: http://dx.doi.org/10.11591/ijpeds.v3i1.1783

Jaringan kolaborasi para penulis

8 penulis · 8 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Imam Khomeini International University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Haniyeh MarefatjouImam Khomeini International University3
Masoud SafariAfiliasi tidak diketahui1
S. M. TorabiAfiliasi tidak diketahui1
Iman SoltaniImam Khomeini International University1
Hossein FaramarziImam Khomeini International University1
Majid KeshmiriAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Induction Motor Speed Control Using Indirect Z-source Matrix Converter with PSO-PI Controller under Various Break Conditions</dc:title>
	<dc:creator>Salim, Majid</dc:creator>
	<dc:creator>Sarvi, Mohammad</dc:creator>
	<dc:description xml:lang="en-US">Since induction motors are preferred over direct current machines in the view of cost and simplicity, they have widely been used in industry. In this paper, the speed of the three-phase induction motor has been controlled using an indirect z-source matrix converter. The method used for this purpose is flux control keeping the V/f ratio and regulating slippage. The effect of flux changes and reference velocity in this method has been taken into consideration and various electric break methods on the motor have been studied accordingly. Coefficients of PI controllers have been obtained in the proposed system for desirable response by PSO Algorithm. The proposed system with the respective converter has been simulated in SIMULINK environment using the information of an induction machine by MATLAB Software. The results show to using the proposed system and indirect z-source matrix converter, appropriate velocity and desirable torque are obtained in a short time. DOI: http://dx.doi.org/10.11591/ijpeds.v3i1.1783</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2013-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/4930</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 3, No 1: March 2013; 41-52</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v3.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/4930/5107</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2012 Majid Salim, Mohammad Sarvi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>