Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

LED-Lamp Design for Renewable Energy-Based DC House Application

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 3 (2018) · hlm. 987–996

DOI
10.11591/ijpeds.v9.i3.pp987-996
ISSN
2722-256X, 2088-8694
Terbit
2018-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper describes the design of an LED lamp to be used in a DC house being supplied using a renewable energy source or in a DC Smart Grid. LED lamps are widely known for its low-electricity consumption. The DC house application is becoming more and more popular due to its advantage of using DC generated electricity, for example from a solar photovoltaic system, directly without having to invert it into AC voltage. However, LED needs a driver to activate and control it. Its mounting also needs certain precaution to anticipate the high heat from the LED. An appropriate heatsink is required before activating the LED. The laboratory results indicate that a 3-watt LED bulb lamp can produce an efficiency up to 93.16% with luminous efficacy 82.29 lm/W. These results prove that an LED bulb consumes less energy and can give an optimal brightness.

Jaringan kolaborasi para penulis

40 penulis · 112 tautan kepenulisan bersama · 64 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Tun Hussein Onn University of Malaysia
  • Universiti Teknologi MARA
  • California Polytechnic State University
  • Universiti Malaysia Perlis
  • Institut Agama Islam Negeri Parepare
  • University of Batna 1
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hadi SuyonoUniversity of Brawijaya6
Ismail MusirinUniversiti Teknologi MARA3
Tri NurwatiUniversity of Brawijaya3
Saidah SaidahInstitut Agama Islam Negeri Parepare2
Afarulrazi Abu BakarTun Hussein Onn University of Malaysia2
Muhammad Aziz MuslimUniversity of Brawijaya2
Hendri MasdiUniversitas Negeri Padang2
Eka MaulanaUniversity of Brawijaya2
Aditya Bagus SetyawanUniversity of Brawijaya2
P paramita Dwi PutriAfiliasi tidak diketahui1
Saiful Izwan SulimanUniversiti Teknologi MARA1
Mohamed ZellaguiUniversity of Batna 11
Muhamad Hazim LokmanUniversiti Teknologi MARA1
Sharifah Azma Syed MustafaUniversiti Teknologi MARA1
Hazlie MokhlisUniversity of Malaya1
Rizki Mendung AriefiantoUniversity of Brawijaya1
Eduard MuljadiAuburn University1
Heru NurwarsitoUniversity of Brawijaya1
Tyler BuryCalifornia Polytechnic State University1
Rahman Azis PrasojoCalifornia Polytechnic State University1
Bambang PurwahyudiUniversitas Bhayangkara Jakarta Raya1
Hari SutiksnoInstitut Sains dan Teknologi Terpadu Surabaya1
Wahyu Mulyo UtomoTun Hussein Onn University of Malaysia1
Tharnisha SithananthanTun Hussein Onn University of Malaysia1
Balarajan SannasyTun Hussein Onn University of Malaysia1
Tole SutiknoUniversitas Ahmad Dahlan1
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis1
Muhammad Gul E. IslamAfiliasi tidak diketahui1
Shahrin Md AyobUniversity of Technology Malaysia1
Azralmukmin AzmiUniversiti Malaysia Perlis1
Goegoes Dwi NusantoroUniversity of Brawijaya1
Mokhammad Hasyim Asy’ariUniversity of Brawijaya1
Asmarashid PonniranTun Hussein Onn University of Malaysia1
M.U. WahyuAfiliasi tidak diketahui1
Sidik NurcahyoPoliteknik Negeri Malang1
Andika Pradnya SatriawanUniversitas Bhayangkara Surabaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">LED-Lamp Design for Renewable Energy-Based DC House Application</dc:title>
	<dc:creator>Hasanah, Rini Nur</dc:creator>
	<dc:creator>Handari, Yosi Dwi</dc:creator>
	<dc:creator>Soeprapto, Soeprapto</dc:creator>
	<dc:creator>Taufik, Taufik</dc:creator>
	<dc:description xml:lang="en-US">This paper describes the design of an LED lamp to be used in a DC house being supplied using a renewable energy source or in a DC Smart Grid. LED lamps are widely known for its low-electricity consumption. The DC house application is becoming more and more popular due to its advantage of using DC generated electricity, for example from a solar photovoltaic system, directly without having to invert it into AC voltage. However, LED needs a driver to activate and control it. Its mounting also needs certain precaution to anticipate the high heat from the LED. An appropriate heatsink is required before activating the LED. The laboratory results indicate that a 3-watt LED bulb lamp can produce an efficiency up to 93.16% with luminous efficacy 82.29 lm/W. These results prove that an LED bulb consumes less energy and can give an optimal brightness.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/14343</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i3.pp987-996</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 3: September 2018; 987-996</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/14343/11295</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Rini Nur Hasanah, Yosi Dwi Handari, Soeprapto Soeprapto, Taufik Taufik</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>