Akses terbuka Jurnal SINTA 1
Sliding mode control strategy based lead screw control design in electromechanical tracking drive system
International Journal of Power Electronics and Drive Systems · Vol. 13 No. 1 (2022) · hlm. 150–158
- ISSN
- 2722-256X, 2088-8694
- Terbit
- 2022-03-01
- Penerbit
- Institute of Advanced Engineering and Science
- Bahasa
- eng
Abstrak
This article presents the research synthesis method of electromechanical tracking system for lead screw control using alternating current (AC) servo motors applied in machine tools, based on the framework of sliding mode control method and the state observer. Control algorithms are capable of compensating for perturbation components, with a state observation to be established to evaluate and compensate for uncertain nonlinear components. The chattering reduction techniques of sliding mode surface are proposed to improve the control effectiveness. The research results are verified by simulation on MATLAB-Simulink, showing that the proportional integral derivative (PID) controller has not met the control quality, but requires the sliding mode control law and state observation as proposed. Then this tracking drive system will work with better quality and can be developed for lead screw system of machine tool. The research results in the paper are also the completed development for calculating, designing, and manufacturing intelligent electrical drive systems in industrial applications.
Kata kunci
Jaringan kolaborasi para penulis
28 penulis · 67 tautan kepenulisan bersama · 32 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- University of Economics - Technology for Industries
- Hanoi University of Science and Technology
- Thai Nguyen University of Technology
- Le Quy Don Technical University
- Duy Tan University
- University of Ulsan
- Electric Power University
- Organisasi lain
- Afiliasi tidak diketahui
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Nguyen Hong Quang | Thai Nguyen University of Technology | 3 |
| Hoang Dinh Co | University of Economics - Technology for Industries | 3 |
| Dang Quoc Du | Afiliasi tidak diketahui | 2 |
| Nguyen Phung Quang | Hanoi University of Science and Technology | 1 |
| Nguyễn Thanh Bình | University of Ulsan | 1 |
| Hoa Van Doan | University of Economics - Technology for Industries | 1 |
| Mai Van Tao | University of Economics - Technology for Industries | 1 |
| Pham Ngoc Sam | University of Economics - Technology for Industries | 1 |
| Nhat Tung Nguyen | Electric Power University | 1 |
| Trần Thị Hải Yến | Thai Nguyen University of Technology | 1 |
| Pham Van Minh | University of Economics - Technology for Industries | 1 |
| Nguyen Duc Dien | University of Economics - Technology for Industries | 1 |
| Tùng Lâm Nguyễn | Hanoi University of Science and Technology | 1 |
| Roan Van Hoa | University of Economics - Technology for Industries | 1 |
| Tran Thi Huong | University of Economics - Technology for Industries | 1 |
| Pham Thi Thu Ha | University of Economics - Technology for Industries | 1 |
| Bui Thi Hai Linh | Thai Nguyen University of Technology | 1 |
| Vuong Dang Quoc | Afiliasi tidak diketahui | 1 |
| Bao Doan Thanh | Quy Nhon University | 1 |
| Hoang Bui Huu | Hanoi University of Science and Technology | 1 |
| Pham Tuan Thanh | Le Quy Don Technical University | 1 |
| Tran Xuan Tinh | Le Quy Don Technical University | 1 |
| Sy Luat Dao | Trường Đại học Công nghệ Đồng Nai | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.