Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

An investigation of piezoelectric tile with drop test technique for energy harvesting application

International Journal of Power Electronics and Drive Systems · Vol. 14 No. 3 (2023) · hlm. 1633–1638

DOI
10.11591/ijpeds.v14.i3.pp1633-1638
ISSN
2722-256X, 2088-8694
Terbit
2023-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper present test and analyses of piezoelectric transducers tile with drop test technique. This piezoelectric tile was tested together with bending mechanism. The bending mechanism was designed using SolidWork software and manufactured by employing 3D printer technology to conduct the evaluation. The piezoelectric transducers connected in a parallel configuration and inserted in piezoelectric tile together with bending mechanism. The drop test employed to test this piezoelectric tile with various loads and speeds. This test conducted based on free fall concept. A wooden box used as a guide to drop an object onto the piezoelectric tile. The various weight load released at a fixed height with different speeds. The output power generated based on the weight and speed of the object were recorded with average force applied on piezoelectric transducer. The highest output power generated was 634.54 µW when 6 kg load released at 2 drop/s with 1.89 N average force applied on each piezoelectric transducer. The lowest output power generated was 6.28 µW when 1 kg load released at 0.5 drop/s with 0.22 N average force applied. The results showed good output power of the piezoelectric transducer was generated for energy harvesting application.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 74 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Guangxi University
  • Universiti Malaysia Sarawak
  • Curtin University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sy Yi SimTun Hussein Onn University of Malaysia3
Wahyu Mulyo UtomoTun Hussein Onn University of Malaysia2
Siong Kai ChienTun Hussein Onn University of Malaysia2
Nor Aira ZambriTun Hussein Onn University of Malaysia2
Alvin John Lim Meng SiangTun Hussein Onn University of Malaysia2
Amirul Adlan AmirnudinAfiliasi tidak diketahui2
Mohammad Hadin A. MalekTun Hussein Onn University of Malaysia2
Sie Long KekTun Hussein Onn University of Malaysia1
Gia Yi SimTun Hussein Onn University of Malaysia1
Goh Hui HwangGuangxi University1
Yonis M. BuswigUniversiti Malaysia Sarawak1
Kah Haw LawCurtin University1
Sim Gia YiGuangxi University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">An investigation of piezoelectric tile with drop test technique for energy harvesting application</dc:title>
	<dc:creator>Asry, Anis Maisarah Mohd</dc:creator>
	<dc:creator>Mustafa, Farahiyah</dc:creator>
	<dc:creator>Yi, Sim Sy</dc:creator>
	<dc:creator>Ishak, Maizul</dc:creator>
	<dc:creator>Ahmad, Aznizam</dc:creator>
	<dc:subject xml:lang="en-US">Bending mechanism; Drop test; Fall concept; Piezoelectric tile; Transducer</dc:subject>
	<dc:description xml:lang="en-US">This paper present test and analyses of piezoelectric transducers tile with drop test technique. This piezoelectric tile was tested together with bending mechanism. The bending mechanism was designed using SolidWork software and manufactured by employing 3D printer technology to conduct the evaluation. The piezoelectric transducers connected in a parallel configuration and inserted in piezoelectric tile together with bending mechanism. The drop test employed to test this piezoelectric tile with various loads and speeds. This test conducted based on free fall concept. A wooden box used as a guide to drop an object onto the piezoelectric tile. The various weight load released at a fixed height with different speeds. The output power generated based on the weight and speed of the object were recorded with average force applied on piezoelectric transducer. The highest output power generated was 634.54 µW when 6 kg load released at 2 drop/s with 1.89 N average force applied on each piezoelectric transducer. The lowest output power generated was 6.28 µW when 1 kg load released at 0.5 drop/s with 0.22 N average force applied. The results showed good output power of the piezoelectric transducer was generated for energy harvesting application.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22319</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v14.i3.pp1633-1638</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 14, No 3: September 2023; 1633-1638</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v14.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22319/14281</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Anis Maisarah Mohd Asry, Farahiyah Mustafa, Sim Sy Yi, Maizul Ishak, Aznizam Ahmad</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>