Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

MATLAB/Simulink based simulations of KY converter for PV panels powered LED lighting system

International Journal of Power Electronics and Drive Systems · Vol. 10 No. 4 (2019) · hlm. 1885–1893

DOI
10.11591/ijpeds.v10.i4.pp1885-1893
ISSN
2722-256X, 2088-8694
Terbit
2019-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The main objective of this research work is to develop KY conveter topology for renewable energy sources.Solar energy is the readily available and is the cheapest form of energy. It is non-polluting and environment friendly. The development of high static gain DC-DC converters is an important research area due to the crescent demand of this technology for several applications supplied by low DC output voltage power sources. It is used to provide the uninterruptable power supply and battery powered to the system. So here, step-up DC-DC converters based on the KY converter are proposed for LED lighting systems. The proposed topologies present high voltages and high efficiency for low input voltage and high output voltage applications. The simulation results of the proposed topology have been presented using MATLAB/SIMULINK software.

Jaringan kolaborasi para penulis

11 penulis · 19 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Karpagam Academy of Higher Education
  • AIMST University
  • Jordan University of Science and Technology
  • Anna University, Chennai
  • Birla Institute of Technology and Science, Pilani
  • Birla Institute of Technology and Science, Pilani - Dubai Campus
  • Hashemite University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
C. Arul MuruganKarpagam Academy of Higher Education3
Umasankar UmasankarBirla Institute of Technology and Science, Pilani - Dubai Campus2
Pratap NairAfiliasi tidak diketahui1
Pavithren PavithrenAIMST University1
Raman Raghu RamanAIMST University1
Fadi Nessir ZghoulJordan University of Science and Technology1
Yousra Hussein Al-BakrawiJordan University of Science and Technology1
Issa EtierHashemite University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">MATLAB/Simulink based simulations of KY converter for PV panels powered LED lighting system</dc:title>
	<dc:creator>Sureshkumaar, G.</dc:creator>
	<dc:creator>Kannan, Nithiyananthan</dc:creator>
	<dc:creator>Thomas, Sunil</dc:creator>
	<dc:description xml:lang="en-US">The main objective of this research work is to develop KY conveter topology for renewable energy sources.Solar energy is the readily available and is the cheapest form of energy. It is non-polluting and environment friendly. The development of high static gain DC-DC converters is an important research area due to the crescent demand of this technology for several applications supplied by low DC output voltage power sources. It is used to provide the uninterruptable power supply and battery powered to the system. So here, step-up DC-DC converters based on the KY converter are proposed for LED lighting systems. The proposed topologies present high voltages and high efficiency for low input voltage and high output voltage applications. The simulation results of the proposed topology have been presented using MATLAB/SIMULINK software.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/18367</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v10.i4.pp1885-1893</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 10, No 4: December 2019; 1885-1893</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v10.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/18367/12918</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 G. Sureshkumaar, Nithiyananthan Kannan, Sunil Thomas</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>