Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Optimizing stator/rotor pole ARC for torque and economy in electric vehicle switched reluctance motors

International Journal of Power Electronics and Drive Systems · Vol. 14 No. 3 (2023) · hlm. 1421–1432

DOI
10.11591/ijpeds.v14.i3.pp1421-1432
ISSN
2722-256X, 2088-8694
Terbit
2023-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Numerous researchers as well as the vehicle industry are paying increasing attention to the switching reluctance motor (SRM) drive. Due to its specialized qualities, SRMs are commonly used in electric vehicle applications. The stator/rotor pole arc of an 8/6 SRM is included in this study's investigation of design principles and performance improvement for poles arcs variation. Several limitations for the stator/rotor pole arc angle are derived for the design principles. These concepts are addressed in the finite element (FE) analysis of SRM topological parameters used in conventional and optimization analysis. The stator/rotor polar arc is tuned for performance using a genetic algorithm (GA) in order to maximize torque and efficiency. An ideal solution is chosen when the optimization results are represented. The proposed method can increase the maximum and average torque with (27.24%, 35.98%, 49.42%, 60.14%), (12.59%, 45.19%, 47.87%, 48.92%) for speeds [900, 1500, 2250, 3000 (rpm)] respectively, As shown by the comparison between the conventional and optimal designs. As well as the efficiency is improved (0.35%, 0.61%, 1.08%, 1.28%) for speeds [900, 1500, 2250, 3000 (rpm)] respectively.

Kata kunci

Jaringan kolaborasi para penulis

4 penulis · 4 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Mosul
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Raghad Adeeb OthmanUniversity of Mosul3
Ali Abbawi Mohammed AlabbawiAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Optimizing stator/rotor pole ARC for torque and economy in electric vehicle switched reluctance motors</dc:title>
	<dc:creator>Al-Farhan, Saif Kh</dc:creator>
	<dc:creator>Al-Yozbaky, Omar Sharaf Al-Deen Yehya</dc:creator>
	<dc:subject xml:lang="en-US">Electric vehicles; Finite element analysis; Genetic algorithm; Optimization; Stator/rotor pole arc; Switched reluctance motor</dc:subject>
	<dc:description xml:lang="en-US">Numerous researchers as well as the vehicle industry are paying increasing attention to the switching reluctance motor (SRM) drive. Due to its specialized qualities, SRMs are commonly used in electric vehicle applications. The stator/rotor pole arc of an 8/6 SRM is included in this study's investigation of design principles and performance improvement for poles arcs variation. Several limitations for the stator/rotor pole arc angle are derived for the design principles. These concepts are addressed in the finite element (FE) analysis of SRM topological parameters used in conventional and optimization analysis. The stator/rotor polar arc is tuned for performance using a genetic algorithm (GA) in order to maximize torque and efficiency. An ideal solution is chosen when the optimization results are represented. The proposed method can increase the maximum and average torque with (27.24%, 35.98%, 49.42%, 60.14%), (12.59%, 45.19%, 47.87%, 48.92%) for speeds [900, 1500, 2250, 3000 (rpm)] respectively, As shown by the comparison between the conventional and optimal designs. As well as the efficiency is improved (0.35%, 0.61%, 1.08%, 1.28%) for speeds [900, 1500, 2250, 3000 (rpm)] respectively.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22620</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v14.i3.pp1421-1432</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 14, No 3: September 2023; 1421-1432</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v14.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22620/14259</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/downloadSuppFile/22620/3140</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Saif Kh Al-Farhan, Omar Sharaf Al-Deen Yehya Al-Yozbaky</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>