Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Flux modulated rotating pole piece magnetic gear

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 4 (2020) · hlm. 1731–1736

DOI
10.11591/ijpeds.v11.i4.pp1731-1736
ISSN
2722-256X, 2088-8694
Terbit
2020-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this paper, the CMG is re-condition so that the pole piece act as the outer rotor instead of surface mount PM. This magnetic coupling of the CMG is similar to the conventional CMG which uses harmonic to transfer the torque and speed from the inner rotor to the outer rotor. The working principle of the proposed CMG is derived analytically and simulated using finite element software. For this recondition, the PM at the outer section become stationary hence, retaining sleeve can be removing. The proposed MG produced 18% higher average torque than the conventional MG with drawback in torque ripple. The proposed CMG also produce higher gear ratio than the same pole pair of conventional CMG.

Jaringan kolaborasi para penulis

32 penulis · 112 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Tun Hussein Onn University of Malaysia
  • Universiti Malaysia Perlis
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Khalil Azha Mohd AnnuarUniversiti Teknikal Malaysia Melaka3
Amar Faiz Zainal AbidinUniversiti Teknikal Malaysia Melaka2
Mohd Badril Nor ShahUniversiti Teknikal Malaysia Melaka2
Erwan SulaimanAfiliasi tidak diketahui2
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia2
Md Zarafi AhmadTun Hussein Onn University of Malaysia2
Mahyuzie JenalTun Hussein Onn University of Malaysia2
Muhamad Faizal YaakubUniversiti Teknikal Malaysia Melaka1
Mohamad Haniff HarunUniversiti Teknikal Malaysia Melaka1
Farriz Hj Md BasarAfiliasi tidak diketahui1
Mohd OmarUniversiti Malaysia Perlis1
N. A. A. HadiUniversiti Teknikal Malaysia Melaka1
Lim Hui YeeUniversiti Teknikal Malaysia Melaka1
Zulhilmi bin ZaidUniversiti Teknikal Malaysia Melaka1
Z. A. GhaniUniversiti Teknikal Malaysia Melaka1
Norfahaniza ZailanyUniversiti Teknikal Malaysia Melaka1
Arman Hadi AzaharUniversiti Teknikal Malaysia Melaka1
Muhamad Haniff HarunUniversiti Teknikal Malaysia Melaka1
Muhammad Faizal YaakubAfiliasi tidak diketahui1
Raja Nor Firdaus Kashfi Raja OthmanUniversiti Teknikal Malaysia Melaka1
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia1
M.F. OmarTun Hussein Onn University of Malaysia1
Saman RahimiTun Hussein Onn University of Malaysia1
Fatihah Shafiqah BahrimTun Hussein Onn University of Malaysia1
J.A. RahimTun Hussein Onn University of Malaysia1
Siti Khalidah RahimiTun Hussein Onn University of Malaysia1
Gadafi M RomalanTun Hussein Onn University of Malaysia1
Azhan Ab RahmanUniversiti Teknikal Malaysia Melaka1
Muhammad Sharil YahayaUniversiti Teknikal Malaysia Melaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Flux modulated rotating pole piece magnetic gear</dc:title>
	<dc:creator>Halim, Mohd Firdaus M. A</dc:creator>
	<dc:creator>Sulaiman, E.</dc:creator>
	<dc:creator>Othman, R. N. F. K. R.</dc:creator>
	<dc:description xml:lang="en-US">In this paper, the CMG is re-condition so that the pole piece act as the outer rotor instead of surface mount PM. This magnetic coupling of the CMG is similar to the conventional CMG which uses harmonic to transfer the torque and speed from the inner rotor to the outer rotor. The working principle of the proposed CMG is derived analytically and simulated using finite element software. For this recondition, the PM at the outer section become stationary hence, retaining sleeve can be removing. The proposed MG produced 18% higher average torque than the conventional MG with drawback in torque ripple. The proposed CMG also produce higher gear ratio than the same pole pair of conventional CMG.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Universiti Tun Hussein Onn, Universiti Teknikal Malaysia Melaka</dc:contributor>
	<dc:date>2020-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20740</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i4.pp1731-1736</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 4: December 2020; 1731-1736</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20740/13251</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/downloadSuppFile/20740/2878</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Mohd Firdaus M. A Halim, E. Sulaiman, R. N. F. K. R. Othman</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>