Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Performance of Brushless DC Drive with Single Current Sensor Fed from PV with High Voltage-Gain DC-DC Converter

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 1 (2018) · hlm. 33–45

DOI
10.11591/ijpeds.v9.i1.pp33-45
ISSN
2722-256X, 2088-8694
Terbit
2018-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents the performance of Brushless DC (BLDC) Motor drive with only one positioning sensor instead of three conventional sensors. The three sensor units are replaced with a single stator current sensor unit in DC bus which further reduces the cost increasing the reliability of the drive system. Using a single sensor in stator requires minimum electronic equipment for the purpose of measurement process. This paper evolves the BLDC motor drive fed from PV system. A high voltage-gain DC-DC converter is presented in this paper to step-up the voltage from PV system. The appropriateness of PV fed BLDC motor drive is verified for variable increamental speed with fixed torque and variable decremental speed with fixed torque operating conditions. BLDC motor drive performance is also performed for variable torque with fixed peed working condition. The proposed system and results are developed using MATLAB/SIMULINK software.

Jaringan kolaborasi para penulis

8 penulis · 8 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Koneru Lakshmaiah Education Foundation
  • University B.D.T College of Engineering
  • Manipal Academy of Higher Education
  • Kakatiya University
  • Prasad V. Potluri Siddhartha Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
B S ManoharAfiliasi tidak diketahui2
R. ShivarudraswamyManipal Academy of Higher Education2
K. B. SiddeshAfiliasi tidak diketahui2
G. G. Raja SekharKoneru Lakshmaiah Education Foundation1
B. Jagadish KumarKakatiya University1
Hemalatha JavvajiPrasad V. Potluri Siddhartha Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Performance of Brushless DC Drive with Single Current Sensor Fed from PV with High Voltage-Gain DC-DC Converter</dc:title>
	<dc:creator>RajaSekhar, G. G</dc:creator>
	<dc:creator>Banakara, Basavaraja</dc:creator>
	<dc:description xml:lang="en-US">This paper presents the performance of Brushless DC (BLDC) Motor drive with only one positioning sensor instead of three conventional sensors. The three sensor units are replaced with a single stator current sensor unit in DC bus which further reduces the cost increasing the reliability of the drive system. Using a single sensor in stator requires minimum electronic equipment for the purpose of measurement process. This paper evolves the BLDC motor drive fed from PV system. A high voltage-gain DC-DC converter is presented in this paper to step-up the voltage from PV system. The appropriateness of PV fed BLDC motor drive is verified for variable increamental speed with fixed torque and variable decremental speed with fixed torque operating conditions. BLDC motor drive performance is also performed for variable torque with fixed peed working condition. The proposed system and results are developed using MATLAB/SIMULINK software.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/9913</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i1.pp33-45</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 1: March 2018; 33-45</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/9913/11109</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 G. G RajaSekhar, Basavaraja Banakara</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>