Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Improvise 3-Level DTC of Induction Machine using Constant Switching Frequency Method by Utilizing Multiband Carrier

International Journal of Power Electronics and Drive Systems · Vol. 7 No. 3 (2016) · hlm. 638–647

DOI
10.11591/ijpeds.v7.i3.pp638-647
ISSN
2722-256X, 2088-8694
Terbit
2016-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents the advantage of using optimal PI parameter tuning strategy of constant switching method in the three phase Direct torque control (DTC) scheme. The DTC system is known to offer fast decoupled control of torque and flux via a simple control structure. Nevertheless, DTC system has two major drawbacks, which are the variable inverter switching frequency and high torque output ripple. The major factorthat contributes to these problems the usage of hysteresis based comparators to control the output torque. The implementation of PI based constant switching method in DTC able to solve these problems while retaining the simple control structure of conventional DTC. The combination usage of 3-level CHMI in this system can further minimize the output torque ripple by providing greater number of vectors. This paper presents detail explanation and calculationof optimal PI parameter tuning strategyconsecutively to enhance the performance of 3-level DTC system. In order to validate the feasibility, the proposed method compared with convention DTC system via simulation and experiment results.

Jaringan kolaborasi para penulis

40 penulis · 121 tautan kepenulisan bersama · 55 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • University of Technology Malaysia
  • Universiti Malaysia Perlis
  • Universitas Ahmad Dahlan
  • Islamic Azad University Yasuj
  • Diponegoro University
  • Universiti Sains Malaysia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nik Rumzi Nik IdrisUniversity of Technology Malaysia36
Kasrul Abdul KarimUniversiti Teknikal Malaysia Melaka31
Mohd Hatta JopriUniversiti Teknikal Malaysia Melaka20
Siti Azura Ahmad TarusanUniversiti Teknikal Malaysia Melaka18
Awang JusohUniversity of Technology Malaysia17
Mohammad JannatiUniversity of Technology Malaysia16
Mohd Junaidi Abdul AzizUniversity of Technology Malaysia16
Nor Azizah Mohd YusoffUniversiti Teknikal Malaysia Melaka13
Mustafa ManapUniversiti Teknikal Malaysia Melaka12
Mohd Luqman Mohd Jamil‬Universiti Teknikal Malaysia Melaka12
Mohamed SalemUniversiti Sains Malaysia10
Abdul Rahim AbdullahUniversiti Teknikal Malaysia Melaka9
Aiman Zakwan JidinUniversiti Teknikal Malaysia Melaka9
Raja Nor Firdaus Kashfi Raja OthmanUniversiti Teknikal Malaysia Melaka9
Lina HandayaniUniversitas Ahmad Dahlan8
Shahreen binti KasimTun Hussein Onn University of Malaysia8
Mahmoud ZadehbagheriIslamic Azad University Yasuj8
Azziddin Mohamad RazaliUniversiti Teknikal Malaysia Melaka8
Muhammad Zaid AihsanUniversiti Malaysia Perlis8
Shahrin Md AyobUniversity of Technology Malaysia7
Mochammad FactaDiponegoro University7
Maaspaliza AzriUniversiti Teknikal Malaysia Melaka7
Nurfaezah AbdullahUniversiti Teknikal Malaysia Melaka7
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis6
Ibrahim AlhamrouniUniversity of Kuala Lumpur6
M. Rahimi YusoffUniversiti Teknikal Malaysia Melaka5
Hendril Satrian PurnamaAfiliasi tidak diketahui5
Watra ArsadiandoAfiliasi tidak diketahui5
Azralmukmin AzmiUniversiti Malaysia Perlis5
Norjulia Mohamad NordinUniversity of Technology Malaysia5
Munawar Agus RiyadiDiponegoro University4
Imam Much Ibnu SubrotoSultan Agung Islamic University4
Muhammad AdoUniversity of Technology Malaysia4
Anggit PamungkasAfiliasi tidak diketahui4
Ibrahim Mohd AlsofyaniUniversity of Technology Malaysia4
Mohammad Javad KianiIslamic Azad University Yasuj4

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Improvise 3-Level DTC of Induction Machine using Constant Switching Frequency Method by Utilizing Multiband Carrier</dc:title>
	<dc:creator>Ramahlingam, Sundram a/l</dc:creator>
	<dc:creator>Jidin, Auzani Bin</dc:creator>
	<dc:creator>Sutikno, Tole</dc:creator>
	<dc:creator>Raj, L. Logan</dc:creator>
	<dc:description xml:lang="en-US">This paper presents the advantage of using optimal PI parameter tuning strategy of constant switching method in the three phase Direct torque control (DTC) scheme. The DTC system is known to offer fast decoupled control of torque and flux via a simple control structure. Nevertheless, DTC system has two major drawbacks, which are the variable inverter switching frequency and high torque output ripple. The major factorthat contributes to these problems the usage of hysteresis based comparators to control the output torque. The implementation of PI based constant switching method in DTC able to solve these problems while retaining the simple control structure of conventional DTC. The combination usage of 3-level CHMI in this system can further minimize the output torque ripple by providing greater number of vectors. This paper presents detail explanation and calculationof optimal PI parameter tuning strategyconsecutively to enhance the performance of 3-level DTC system. In order to validate the feasibility, the proposed method compared with convention DTC system via simulation and experiment results.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2016-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5246</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v7.i3.pp638-647</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 7, No 3: September 2016; 638-647</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v7.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5246/5469</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 Sundram a/l Ramahlingam, Auzani Bin Jidin, Tole Sutikno, L. Logan Raj</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>