Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Optimization of double stator PMSM with different slot number in inner and outer stators using genetic algorithm

International Journal of Power Electronics and Drive Systems · Vol. 12 No. 2 (2021) · hlm. 726–735

DOI
10.11591/ijpeds.v12.i2.pp726-735
ISSN
2722-256X, 2088-8694
Terbit
2021-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper describes the performance enhancement of double stator permanent magnet synchronous machines (DS-PMSM) based on genetic algorithm optimization (GAO). Generally, throughout the development stage, an analytical calculation is implemented to build the initial model of the DS-PMSM since the analytical calculation can provide the initial parameters based on the types and materials used in the machine design. For further improvement, GAO might potentially be applied to provide the optimization technique in searching the optimal motor parameters iteratively and intelligently with specific objective functions. For this aim, a three-phase, DS-PMSM with different number of slots between the outer and inner stators is first designed by using analytical parameter estimation and then later optimized by GAO. The outer and inner stators have 12-slots and 9-slots respectively, while, the rotor carries 10 magnetic poles. Four main input motor parameters, i.e. outer stator slot opening, outer magnet pole arc, inner stator slot opening and inner magnet pole arc are varied and optimized to achieve the design objective functions, i.e. high output torque, low torque ripple, low cogging torque and low total harmonic distortion (THDv). The results from the optimized GAO are compared with the initial motor model and further validated by finite element method (FEM). The results show a good agreement between GAO and FEM. GAO has achieved very significant improvements in enhancing the machine performance.

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 61 tautan kepenulisan bersama · 27 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Sains Malaysia
  • University of Kuala Lumpur
  • Universiti Malaysia Perlis
  • Universitas Ahmad Dahlan
  • National University of Malaysia
  • Northern Technical University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tole SutiknoUniversitas Ahmad Dahlan2
Auzani JidinUniversiti Teknikal Malaysia Melaka2
S. FarinaUniversiti Teknikal Malaysia Melaka2
R. N. FirdausUniversiti Teknikal Malaysia Melaka2
Mohamed SalemUniversiti Sains Malaysia2
Liong Han WenUniversity of Kuala Lumpur1
Taha Ahmad HusseinAfiliasi tidak diketahui1
F. AzharUniversiti Teknikal Malaysia Melaka1
Maaspaliza AzriUniversiti Teknikal Malaysia Melaka1
R. SuhairiUniversiti Teknikal Malaysia Melaka1
Muhammad Ammirrul Atiqi Mohd ZainuriNational University of Malaysia1
Chanuri CharinUniversiti Sains Malaysia1
Taha Ahmed HusseinNorthern Technical University1
Jawad Hasan AlkhateebPrince Mohammad bin Fahd University1
M. RezalUniversity of Kuala Lumpur1
Mohamad Nazir AbdullahUniversiti Sains Malaysia1
Musa Mohammed GujjaUniversiti Sains Malaysia1
Muhammad Najwan HamidiUniversiti Sains Malaysia1
Khalil AlluhaybiTaibah University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Optimization of double stator PMSM with different slot number in inner and outer stators using genetic algorithm</dc:title>
	<dc:creator>Ahmad, Mohd Saufi</dc:creator>
	<dc:creator>Ishak, Dahaman</dc:creator>
	<dc:creator>Leong, Tiang Tow</dc:creator>
	<dc:creator>Mohamed, Mohd Rezal</dc:creator>
	<dc:subject xml:lang="en-US">Double-stator; Fractional motor; GA optimization; Permanent magnet; Synchronous motor</dc:subject>
	<dc:description xml:lang="en-US">This paper describes the performance enhancement of double stator permanent magnet synchronous machines (DS-PMSM) based on genetic algorithm optimization (GAO). Generally, throughout the development stage, an analytical calculation is implemented to build the initial model of the DS-PMSM since the analytical calculation can provide the initial parameters based on the types and materials used in the machine design. For further improvement, GAO might potentially be applied to provide the optimization technique in searching the optimal motor parameters iteratively and intelligently with specific objective functions. For this aim, a three-phase, DS-PMSM with different number of slots between the outer and inner stators is first designed by using analytical parameter estimation and then later optimized by GAO. The outer and inner stators have 12-slots and 9-slots respectively, while, the rotor carries 10 magnetic poles. Four main input motor parameters, i.e. outer stator slot opening, outer magnet pole arc, inner stator slot opening and inner magnet pole arc are varied and optimized to achieve the design objective functions, i.e. high output torque, low torque ripple, low cogging torque and low total harmonic distortion (THDv). The results from the optimized GAO are compared with the initial motor model and further validated by finite element method (FEM). The results show a good agreement between GAO and FEM. GAO has achieved very significant improvements in enhancing the machine performance.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Universiti Sains Malaysia</dc:contributor>
	<dc:date>2021-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21181</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v12.i2.pp726-735</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 12, No 2: June 2021; 726-735</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v12.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21181/13395</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Mohd Saufi Ahmad, Dahaman Ishak, Tiang Tow Leong, Mohd Rezal Mohamed</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>