Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Capacitive power transfer in biomedical implantable device: a review

International Journal of Power Electronics and Drive Systems · Vol. 10 No. 2 (2019) · hlm. 935–942

DOI
10.11591/ijpeds.v10.i2.pp935-942
ISSN
2722-256X, 2088-8694
Terbit
2019-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents the development of a new design method of capacitive power transfer (CPT) which is based on hybrid concept for Biomedical Implants. This method is able to improve various issues found in the widely used CPT system that is bipolar CPT method. Based on the ability of this purposed, the simulation of the CPT system has been designed to prove an amount of power transferred through a layer of tissue. The design used to validate the suggested model which to powering implanted device, and it was performed with 3cm square plates, which have a layer of beef with the 5mm thickness in between 2 coupling plate. Power signal was generated by Class E zero voltage switching. The Class E zero voltage switching has been designed to generating alternate current with the 1MHz frequency appropriate to the hybrid CPT system specification.

Jaringan kolaborasi para penulis

35 penulis · 126 tautan kepenulisan bersama · 31 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Teknologi MARA
  • Universiti Malaysia Terengganu
  • Universiti Malaysia Perlis
  • Christian-Albrechts-Universität zu Kiel
  • University of Technology Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yusmarnita binti YusopUniversiti Teknikal Malaysia Melaka15
Huzaimah HusinUniversiti Teknikal Malaysia Melaka6
Siti Huzaimah HusinUniversiti Teknikal Malaysia Melaka5
Khairul Kamarudin HasanUniversiti Teknologi MARA5
Md Rabiul AwalUniversiti Malaysia Terengganu4
A. A. M. IsaUniversiti Teknikal Malaysia Melaka3
Norezmi JamalUniversiti Teknikal Malaysia Melaka3
Thoriq ZaidUniversiti Teknikal Malaysia Melaka3
Cheok Yan QiUniversiti Teknikal Malaysia Melaka2
F. K. A. RahmanAfiliasi tidak diketahui2
Ahmad Husni Mohd ShapriUniversiti Malaysia Perlis2
Zaki MustapaUniversiti Teknikal Malaysia Melaka2
SK NguangAfiliasi tidak diketahui2
N. X. YinUniversiti Teknikal Malaysia Melaka1
Nor Diyana Md SinUniversiti Teknologi MARA1
R. A. RaniUniversiti Teknikal Malaysia Melaka1
F. K. Abdul RahmanAfiliasi tidak diketahui1
Amy Sarah NguUniversiti Teknikal Malaysia Melaka1
Noor Badariah AsanUniversiti Teknikal Malaysia Melaka1
Peter Adam HoeherChristian-Albrechts-Universität zu Kiel1
Masmaria Abdul MajidUniversiti Teknologi MARA1
Mohd Sufian RamliUniversiti Teknologi MARA1
Mohd Haizal JamaluddinUniversity of Technology Malaysia1
Ahmed Al-HattamiAfiliasi tidak diketahui1
M. S. M. IsaUniversiti Teknikal Malaysia Melaka1
N NabilaUniversiti Teknikal Malaysia Melaka1
Amat Amir BasariUniversiti Teknikal Malaysia Melaka1
A. M. DarsonoUniversiti Teknikal Malaysia Melaka1
O. Z. GuatAfiliasi tidak diketahui1
F.K. Abdul RahmanAfiliasi tidak diketahui1
Youssef Abdel AzizAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Capacitive power transfer in biomedical implantable device: a review</dc:title>
	<dc:creator>Mustapa, Muhammad Zaki bin</dc:creator>
	<dc:creator>Saat, Shakir</dc:creator>
	<dc:creator>Yusof, Yusmarnita</dc:creator>
	<dc:creator>Shaari, Muslimah Meor</dc:creator>
	<dc:description xml:lang="en-US">This paper presents the development of a new design method of capacitive power transfer (CPT) which is based on hybrid concept for Biomedical Implants. This method is able to improve various issues found in the widely used CPT system that is bipolar CPT method. Based on the ability of this purposed, the simulation of the CPT system has been designed to prove an amount of power transferred through a layer of tissue. The design used to validate the suggested model which to powering implanted device, and it was performed with 3cm square plates, which have a layer of beef with the 5mm thickness in between 2 coupling plate. Power signal was generated by Class E zero voltage switching. The Class E zero voltage switching has been designed to generating alternate current with the 1MHz frequency appropriate to the hybrid CPT system specification.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Universiti Teknikal Malaysia, Melaka</dc:contributor>
	<dc:date>2019-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/16386</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v10.i2.pp935-942</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 10, No 2: June 2019; 935-942</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v10.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/16386/12475</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/downloadSuppFile/16386/2098</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Muhammad Zaki bin Mustapa, Shakir Saat, Yusmarnita Yusof, Muslimah Meor Shaari</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>