Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Power generation by using piezoelectric transducer with bending mechanism support

International Journal of Power Electronics and Drive Systems · Vol. 10 No. 1 (2019) · hlm. 562–567

DOI
10.11591/ijpeds.v10.i1.pp562-567
ISSN
2722-256X, 2088-8694
Terbit
2019-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents about power generation by using piezoelectric transducer with bending mechanism support. In this study, bending mechanism is developed by employing 3D printer technology. This 3D model is used as a support for a piezoelectric transducer during deflection or bending process. During deflection condition, stress that applied on the piezoelectric transducer will generate electrical energy. The 3D model helps the piezoelectric transducer to produce more voltage output. A finger press test used as evaluation method for the voltage output of the piezoelectric transducer. The experiment is tested by varying three different 3D model with the different diameter for the middle hole for each of the model. A round shape of the piezoelectric transducer with size of 50 mm in diameter is used to conduct the experiment. Thus, when the piezoelectric transducer placed on the 3D model with 0 mm in diameter of middle hole will producing 5.4 V voltage output. However, 3D model with 30 mm diameter of middle hole, the output increases up to 19.0 V. The output voltage for piezoelectric transducer reached its highest voltage when placed on the 3D model with middle hole of 40 mm which is 34.4 V. This bending mechanism can be used to increase the output of piezoelectric transducer as it applied underneath footstep tile at crowded area to harvest the energy produced from walking activities. The power generated can be used to power up various electronic devices.

Jaringan kolaborasi para penulis

14 penulis · 48 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sim Sy YiTun Hussein Onn University of Malaysia4
Sy Yi SimTun Hussein Onn University of Malaysia3
Amirul Adlan AmirnudinAfiliasi tidak diketahui2
Mohammad Hadin A. MalekTun Hussein Onn University of Malaysia2
Wahyu Mulyo UtomoTun Hussein Onn University of Malaysia1
Siong Kai ChienTun Hussein Onn University of Malaysia1
Sie Long KekTun Hussein Onn University of Malaysia1
Nor Aira ZambriTun Hussein Onn University of Malaysia1
Alvin John Lim Meng SiangTun Hussein Onn University of Malaysia1
Gia Yi SimTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Power generation by using piezoelectric transducer with bending mechanism support</dc:title>
	<dc:creator>Asry, Anis Maisarah Mohd</dc:creator>
	<dc:creator>Mustafa, Farahiyah</dc:creator>
	<dc:creator>Ishak, Maizul</dc:creator>
	<dc:creator>Ahmad, Aznizam</dc:creator>
	<dc:description xml:lang="en-US">This paper presents about power generation by using piezoelectric transducer with bending mechanism support. In this study, bending mechanism is developed by employing 3D printer technology. This 3D model is used as a support for a piezoelectric transducer during deflection or bending process. During deflection condition, stress that applied on the piezoelectric transducer will generate electrical energy. The 3D model helps the piezoelectric transducer to produce more voltage output. A finger press test used as evaluation method for the voltage output of the piezoelectric transducer. The experiment is tested by varying three different 3D model with the different diameter for the middle hole for each of the model. A round shape of the piezoelectric transducer with size of 50 mm in diameter is used to conduct the experiment. Thus, when the piezoelectric transducer placed on the 3D model with 0 mm in diameter of middle hole will producing 5.4 V voltage output. However, 3D model with 30 mm diameter of middle hole, the output increases up to 19.0 V. The output voltage for piezoelectric transducer reached its highest voltage when placed on the 3D model with middle hole of 40 mm which is 34.4 V. This bending mechanism can be used to increase the output of piezoelectric transducer as it applied underneath footstep tile at crowded area to harvest the energy produced from walking activities. The power generated can be used to power up various electronic devices.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/16900</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v10.i1.pp562-567</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 10, No 1: March 2019; 562-567</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v10.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/16900/10935</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Anis Maisarah Mohd Asry, Farahiyah Mustafa, Maizul Ishak, Aznizam Ahmad</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>