Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Investigation on Chassis Dynamometer with Capability to Test Regenerative Braking Function

International Journal of Power Electronics and Drive Systems · Vol. 6 No. 3 (2015) · hlm. 657–664

DOI
10.11591/ijpeds.v6.i3.pp657-664
ISSN
2722-256X, 2088-8694
Terbit
2015-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

An investigation-based approach to a bidirectional power flow method for testing regenerative braking function on a chassis dynamometer is presented. The requirements and specifications for capability to test regenerative braking function of Electric Vehicle (EV) emulated by using a bidirectional chassis dynamometer are discussed. The dynamometer emulates road load conditions during testing, and regenerative braking is able to test their function while the vehicle is in deceleration condition. Performances of power requirement are illustrated and translated into sequence diagram. It is shown that the proposed topology is particularly advantageous in generating and regenerating power for energy consumption. The overview of conventional chassis dynamometer and the proposed chassis dynamometer is compared to investigate the parameter in the development of regenerative braking test.

Jaringan kolaborasi para penulis

10 penulis · 16 tautan kepenulisan bersama · 6 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • University of Malaya
  • Universiti Tenaga Nasional
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kamarul Hawari GhazaliUniversiti Malaysia Pahang Al-Sultan Abdullah1
Nasrudin Abd RahimUniversity of Malaya1
Mohd Shafie BakarUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mushtaq NajeebUniversiti Malaysia Pahang Al-Sultan Abdullah1
Muhamad MansorUniversiti Tenaga Nasional1
Ramdan RazaliUniversiti Malaysia Pahang Al-Sultan Abdullah1
Ekhlas Mhawi ThajeelUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohd Herwan SulaimanUniversiti Malaysia Pahang Al-Sultan Abdullah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Investigation on Chassis Dynamometer with Capability to Test Regenerative Braking Function</dc:title>
	<dc:creator>Othman, Nurul Azwa</dc:creator>
	<dc:creator>Daniyal, Hamdan</dc:creator>
	<dc:description xml:lang="en-US">An investigation-based approach to a bidirectional power flow method for testing regenerative braking function on a chassis dynamometer is presented. The requirements and specifications for capability to test regenerative braking function of Electric Vehicle (EV) emulated by using a bidirectional chassis dynamometer are discussed. The dynamometer emulates road load conditions during testing, and regenerative braking is able to test their function while the vehicle is in deceleration condition. Performances of power requirement are illustrated and translated into sequence diagram. It is shown that the proposed topology is particularly advantageous in generating and regenerating power for energy consumption. The overview of conventional chassis dynamometer and the proposed chassis dynamometer is compared to investigate the parameter in the development of regenerative braking test.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2015-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5164</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v6.i3.pp657-664</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 6, No 3: September 2015; 657-664</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v6.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5164/4428</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2015 Nurul Azwa Othman, Hamdan Daniyal</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>