Horizontal Axis Wind Turbine (HAWT) had been widely used in Malaysia, however, research concluded that the power produced is still low which approximately 0.02% from the wind turbine input is. The average wind speed in Penang, Malaysia, is recorded between 1.0 m/s to 2.5 m/s whereby to produce 2.7 kW of power by HAWT, 12.0 m/s of average wind speed is needed. Therefore, the main objective in this project is to develop and analyse the suitability on the Vertical Axis Wind Turbine (VAWT) to be used for power generation with the wind speed in between 0.5 m/s to 3.0 m/s. Ducting system is chosen rather than the open air since commercial buildings used Heat Ventilation Air Conditioning (HVAC) system. Arduino microcontroller and LabVIEW is used as interfaced to setup two types of sensors that is temperature sensor and anemometer.
Jaringan kolaborasi para penulis
19 penulis ·
65 tautan kepenulisan bersama
· 16 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universiti Teknologi MARA
Universiti Sains Malaysia
Penang Development Corporation
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.