Akses terbuka
Jurnal
SINTA 1
Analysis and implementation of peak armature current (Imax) of a chopper-fed DC-DC motor drive in DCM
International Journal of Power Electronics and Drive Systems · Vol. 16 No. 1 (2025) · hlm. 96–105
ISSN 2722-256X, 2088-8694
Terbit 2025-03-01
Penerbit Institute of Advanced Engineering and Science
Bahasa eng
Abstrak
At low frequencies of operation in a chopper-fed direct current (DC) motor drive, the armature current may become discontinuous thus the controller operates in discontinuous conduction mode (DCM). Since the minimum armature current is zero in DCM, the analysis of peak armature current (Imax) is to investigate the ripple content in armature current at different values of duty cycle which will help in decreasing the peaky current of DC motor during operation. The simulation was carried out using MATLAB-Simulink software and the laboratory setup was based on Atmega 328 microcontroller board. In this paper, the theoretical and experimental analysis of peak armature current were performed at fix low frequency in DCM and variable duty cycles to provide full control of DC motor speed. The results show that the peak armature current changes with the change of duty cycles and its magnitude is decreased almost 50% at higher duty cycle values.
Jaringan kolaborasi para penulis
15 penulis ·
41 tautan kepenulisan bersama
· 18 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universiti Sains Malaysia Universitas Ahmad Dahlan Universiti Teknikal Malaysia Melaka Universiti Malaysia Perlis Taibah University
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Analysis and implementation of peak armature current (Imax) of a chopper-fed DC-DC motor drive in DCM</dc:title>
<dc:creator>Abdullah, Mohamad Nazir</dc:creator>
<dc:creator>Mohamed Hariri, Muhammad Hafeez</dc:creator>
<dc:creator>Mat Desa, Mohd Khairunaz</dc:creator>
<dc:creator>Mamat, Mohd Nadzri</dc:creator>
<dc:creator>Kaharuddin, Suardi</dc:creator>
<dc:subject xml:lang="en-US">armature current; Atmega 328 microcontroller; buck converter; DC motor; discontinuous current mode</dc:subject>
<dc:description xml:lang="en-US">At low frequencies of operation in a chopper-fed direct current (DC) motor drive, the armature current may become discontinuous thus the controller operates in discontinuous conduction mode (DCM). Since the minimum armature current is zero in DCM, the analysis of peak armature current (Imax) is to investigate the ripple content in armature current at different values of duty cycle which will help in decreasing the peaky current of DC motor during operation. The simulation was carried out using MATLAB-Simulink software and the laboratory setup was based on Atmega 328 microcontroller board. In this paper, the theoretical and experimental analysis of peak armature current were performed at fix low frequency in DCM and variable duty cycles to provide full control of DC motor speed. The results show that the peak armature current changes with the change of duty cycles and its magnitude is decreased almost 50% at higher duty cycle values.</dc:description>
<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
<dc:contributor xml:lang="en-US">Universiti Sains Malaysia</dc:contributor>
<dc:date>2025-03-01</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23370</dc:identifier>
<dc:identifier>10.11591/ijpeds.v16.i1.pp96-105</dc:identifier>
<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 16, No 1: March 2025; 96-105</dc:source>
<dc:source>2722-256X</dc:source>
<dc:source>2088-8694</dc:source>
<dc:source>10.11591/ijpeds.v16.i1</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23370/14836</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2025 Muhammad Hafeez Mohamed Hariri</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Abdullah, M. N., Mohamed Hariri, M. H., Mat Desa, M. K., Mamat, M. N., & Kaharuddin, S. (2025). Analysis and implementation of peak armature current (Imax) of a chopper-fed DC-DC motor drive in DCM. International Journal of Power Electronics and Drive Systems, 16(1), 96–105. https://doi.org/10.11591/ijpeds.v16.i1.pp96-105
Salin
IEEE
M. N. Abdullah, M. H. Mohamed Hariri, M. K. Mat Desa, M. N. Mamat, and S. Kaharuddin, “Analysis and implementation of peak armature current (Imax) of a chopper-fed DC-DC motor drive in DCM,” International Journal of Power Electronics and Drive Systems, vol. 16, no. 1, pp. 96–105, 2025, doi: 10.11591/ijpeds.v16.i1.pp96-105.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.