Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

DSP-Based Sensorless Speed Control of a Permanent Magnet Synchronous Motor using Sliding Mode Current Observer

International Journal of Power Electronics and Drive Systems · Vol. 4 No. 3 (2014) · hlm. 281–289

ISSN
2722-256X, 2088-8694
Terbit
2014-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this paper, experimental results of 3-phase permanent magnet synchronous motor (PMSM) sensorless speed control are presented. To estimate the rotor position, a sliding mode current observer (SMCO) was implemented. This observer estimates the back emfs of the motor in the stationary reference frame using only the measured voltages and currents of the motor. These emfs were utilized to obtain the rotor position. The speed of the motor was calculated by differentiating the rotor position angle. The stability of the proposed SMCO was verified using Lyapunov method to determine the observer gain. The saturation function was adopted in order to reduce the chattering phenomenon caused by the SMCO. A vector control method was employed to achieve the sensorless drive system. The control application was developed in C/C++ language and implemented using the Texas Instruments TMS320LF2812 digital signal processor (DSP). This new processor enables intelligent control for motors. We used to test the drive the MCK2812 which is a professional development kit available from Technosoft Company. The theoretical finding is validated with experimental results that show the effectiveness of the real-time implementation.DOI: http://dx.doi.org/10.11591/ijpeds.v4i3.5704

Jaringan kolaborasi para penulis

4 penulis · 4 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Université Moulay Ismail de Meknes
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hatim JbariUniversité Moulay Ismail de Meknes2
Badr Bououlid IdrissiUniversité Moulay Ismail de Meknes2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">DSP-Based Sensorless Speed Control of a Permanent Magnet Synchronous Motor using Sliding Mode Current Observer</dc:title>
	<dc:creator>Askour, Rachid</dc:creator>
	<dc:creator>Bououlid Idrissi, Badr</dc:creator>
	<dc:description xml:lang="en-US">In this paper, experimental results of 3-phase permanent magnet synchronous motor (PMSM) sensorless speed control are presented. To estimate the rotor position, a sliding mode current observer (SMCO) was implemented. This observer estimates the back emfs of the motor in the stationary reference frame using only the measured voltages and currents of the motor. These emfs were utilized to obtain the rotor position. The speed of the motor was calculated by differentiating the rotor position angle. The stability of the proposed SMCO was verified using Lyapunov method to determine the observer gain. The saturation function was adopted in order to reduce the chattering phenomenon caused by the SMCO. A vector control method was employed to achieve the sensorless drive system. The control application was developed in C/C++ language and implemented using the Texas Instruments TMS320LF2812 digital signal processor (DSP). This new processor enables intelligent control for motors. We used to test the drive the MCK2812 which is a professional development kit available from Technosoft Company. The theoretical finding is validated with experimental results that show the effectiveness of the real-time implementation.DOI: http://dx.doi.org/10.11591/ijpeds.v4i3.5704</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2014-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5000</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 4, No 3: September 2014; 281-289</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v4.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5000/4749</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2014 Rachid Askour, Badr Bououlid Idrissi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>