Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and analysis of double stator HE-FSM for aircraft applications

International Journal of Power Electronics and Drive Systems · Vol. 12 No. 1 (2021) · hlm. 51–58

DOI
10.11591/ijpeds.v12.i1.pp51-58
ISSN
2722-256X, 2088-8694
Terbit
2021-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The main objective of aerospace industry is to produce all electric aircraft (AEA) equipped by electrical devices in coming developments. Electrical machines that provide higher torque densities are gaining more interest for researchers to obtain sustainable direct-drive electrical propulsion system for aircraft applications. In addition to lesser weight and higher torque density, a machine should be “fault tolerant” to applied in aerospace applications. A novel machine for high starting torque, identified as flux switching machine (FSM) was established over the last decade. FSMs comprise all effective sources on stator including robust rotor structure. These machines exhibited higher “torque-to-weight ratios” and reliability. Nonetheless, the challenge of developing a machine suitable for aircraft applications goes far beyond electromagnetic design and much deeper into the field of mechanical systems than traditional ones. Thus, a new double stator (DS) hybrid excitation (HE) FSM design employing segmented rotor is proposed and analyzed in this research work. The suggested design for DS HE-FSM comprises of six field excitation coils (FECs) and six permanent magnets (PMs) as their excitation sources. In this research, investigation of DS HE-FSM is accomplished with respect to flux linkage, back EMF, cogging torque and torque analysis based on 2D FEA.

Kata kunci

Jaringan kolaborasi para penulis

24 penulis · 83 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Universiti Teknikal Malaysia Melaka
  • Taylor's University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rajesh KumarTun Hussein Onn University of Malaysia5
Fatihah Shafiqah BahrimTun Hussein Onn University of Malaysia5
Enwelum I. MbadiweTun Hussein Onn University of Malaysia4
Siti Khalidah RahimiTun Hussein Onn University of Malaysia4
Mohd Firdaus Mohd Ab HalimUniversiti Teknikal Malaysia Melaka3
Md Zarafi AhmadTun Hussein Onn University of Malaysia3
Mohd Fairoz OmarTun Hussein Onn University of Malaysia2
Raja Nor Firdaus Kashfi Raja OthmanUniversiti Teknikal Malaysia Melaka2
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia2
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia2
Zarafi Md. AhmadTun Hussein Onn University of Malaysia1
E. SulaimanAfiliasi tidak diketahui1
Gadafi M RomalanTun Hussein Onn University of Malaysia1
Azhan Ab RahmanUniversiti Teknikal Malaysia Melaka1
Muhammad Sharil YahayaUniversiti Teknikal Malaysia Melaka1
Chockalingam Aravind VaithilingamTaylor's University1
Jaudah Abd RaniTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design and analysis of double stator HE-FSM for aircraft applications</dc:title>
	<dc:creator>Ali, Hassan</dc:creator>
	<dc:creator>Sulaiman, Erwan</dc:creator>
	<dc:creator>Jenal, Mahyuzie</dc:creator>
	<dc:creator>Ali, Irfan</dc:creator>
	<dc:creator>Jusoh, Laili Iwani</dc:creator>
	<dc:creator>Ahmad, Zarafi</dc:creator>
	<dc:creator>Firdaus, Mohd</dc:creator>
	<dc:subject xml:lang="en-US">Aircraft , Double stator, Flux switching, Hybrid excitation, Segmented rotor</dc:subject>
	<dc:description xml:lang="en-US">The main objective of aerospace industry is to produce all electric aircraft (AEA) equipped by electrical devices in coming developments. Electrical machines that provide higher torque densities are gaining more interest for researchers to obtain sustainable direct-drive electrical propulsion system for aircraft applications. In addition to lesser weight and higher torque density, a machine should be “fault tolerant” to applied in aerospace applications. A novel machine for high starting torque, identified as flux switching machine (FSM) was established over the last decade. FSMs comprise all effective sources on stator including robust rotor structure. These machines exhibited higher “torque-to-weight ratios” and reliability. Nonetheless, the challenge of developing a machine suitable for aircraft applications goes far beyond electromagnetic design and much deeper into the field of mechanical systems than traditional ones. Thus, a new double stator (DS) hybrid excitation (HE) FSM design employing segmented rotor is proposed and analyzed in this research work. The suggested design for DS HE-FSM comprises of six field excitation coils (FECs) and six permanent magnets (PMs) as their excitation sources. In this research, investigation of DS HE-FSM is accomplished with respect to flux linkage, back EMF, cogging torque and torque analysis based on 2D FEA.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">University Tun Hussein Onn Malaysia (UTHM)</dc:contributor>
	<dc:date>2021-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20962</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v12.i1.pp51-58</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 12, No 1: March 2021; 51-58</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v12.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20962/13383</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Hassan Ali, Erwan Sulaiman, Mahyuzie Jenal, Irfan Ali, Laili Iwani Jusoh, Zarafi Ahmad, Mohd Firdaus</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>