Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Applied measurement of the motor speed controller for washing machine with random loads, part II

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 1 (2020) · hlm. 442–450

DOI
10.11591/ijpeds.v11.i1.pp442-450
ISSN
2722-256X, 2088-8694
Terbit
2020-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This research presents a very important industrial issue of controlling the production target, despite changing loads. Engines of various types, whether synchronous or synchronous, operate on single and three phase AC, DC motors or special motors such as stepper and servo. In all these motors, the speed control of the torque and speed of the above motors has gained considerable importance. There are three main ways reviewed in the current search, the second that completes the previous research referred to in the references. The three methods are PID method, LQR method and feeding –forward control methods. A real DC motor was used in electrical engineering machine laboratory at University of Diyala, Iraq. Where the actual parameters of the DC motor were actually calculated. The practical parameters were then integrated into the three control method Matlab codes for the purpose of comparing the results and representing the motor performance in the indicated control methods.

Jaringan kolaborasi para penulis

12 penulis · 20 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • University of Diyala
  • University of Kuala Lumpur
  • Hitachi (Japan)
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Lafta E. J. AlkurawyUniversity of Diyala2
Ammar Issa IsmaelUniversity of Diyala1
Enas Dawood HassanUniversity of Diyala1
Inaam Ibrahim AliAfiliasi tidak diketahui1
Dur Muhammad SoomroTun Hussein Onn University of Malaysia1
Syed Zahurul IslamTun Hussein Onn University of Malaysia1
Ummi SorfinaHitachi (Japan)1
Kok Boon ChingTun Hussein Onn University of Malaysia1
Ismail Ahmat MahadiTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Applied measurement of the motor speed controller for washing machine with random loads, part II</dc:title>
	<dc:creator>Mohammed, Khalid</dc:creator>
	<dc:creator>Yahaya, Jabbar A.F.</dc:creator>
	<dc:creator>Khan, Reyasudin Basir</dc:creator>
	<dc:description xml:lang="en-US">This research presents a very important industrial issue of controlling the production target, despite changing loads. Engines of various types, whether synchronous or synchronous, operate on single and three phase AC, DC motors or special motors such as stepper and servo. In all these motors, the speed control of the torque and speed of the above motors has gained considerable importance. There are three main ways reviewed in the current search, the second that completes the previous research referred to in the references. The three methods are PID method, LQR method and feeding –forward control methods. A real DC motor was used in electrical engineering machine laboratory at University of Diyala, Iraq. Where the actual parameters of the DC motor were actually calculated. The practical parameters were then integrated into the three control method Matlab codes for the purpose of comparing the results and representing the motor performance in the indicated control methods.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20493</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i1.pp442-450</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 1: March 2020; 442-450</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20493/13056</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Khalid Mohammed, Jabbar A.F. Yahaya, Reyasudin Basir Khan</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>