Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Development of Test Vessel for Gas Insulation Breakdown Test

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 2 (2018) · hlm. 873–879

DOI
10.11591/ijpeds.v9.i2.pp873-879
ISSN
2722-256X, 2088-8694
Terbit
2018-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper discusses a new test vessel developed to investigate the breakdown test performance of gas insulation. The test vessel is equipped with certain specialty including pressure chamber and control measures. Through help from a steering, it is provide of controlling the gap length of the electrodes without the need of removing the gas. Other control measures include humidity, temperature, and pressure readings. The humidity and temperature are read wirelessly and from the readings, the necessary atmospheric corrections can be made according to standards. The developed vessel is then tested with AC breakdown test using air with various gap lengths and various electrode configurations. There are two types of electrode configuration used in this project i.e., rod (R0.5)-plane and plane-plane.

Jaringan kolaborasi para penulis

40 penulis · 148 tautan kepenulisan bersama · 26 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Tun Hussein Onn University of Malaysia
  • Cardiff University
  • University of Technology Malaysia
  • Universiti Sains Malaysia
  • Universiti Malaysia Kelantan
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sharin Ab GhaniUniversiti Teknikal Malaysia Melaka12
Mohd Shahril Ahmad KhiarUniversiti Teknikal Malaysia Melaka5
Nor Akmal Mohd JamailTun Hussein Onn University of Malaysia4
Mohd Fairouz Mohd YousofTun Hussein Onn University of Malaysia4
Mohd Safwan MohamadUniversiti Teknikal Malaysia Melaka4
Nordiana Azlin OthmanTun Hussein Onn University of Malaysia3
Rahisham Abd RahmanTun Hussein Onn University of Malaysia3
Nurul Farahwahida Md YasidTun Hussein Onn University of Malaysia3
Norazhar B. Abu BakarUniversiti Teknikal Malaysia Melaka2
Nur Farhana Mohd AzlanUniversiti Teknikal Malaysia Melaka2
A. A. AlawadyAfiliasi tidak diketahui2
Salem Mgammal Al-AmeriTun Hussein Onn University of Malaysia2
Nur Amirah OthmanUniversiti Teknikal Malaysia Melaka2
Aminuddin AmanUniversiti Teknikal Malaysia Melaka2
Sharin Abd GhaniAfiliasi tidak diketahui2
Nor Asiah MuhamadUniversiti Sains Malaysia2
Zulkarnain Ahmad NoordenUniversity of Technology Malaysia2
Muhammad Ilman Hakimi Chua AbdullahUniversiti Teknikal Malaysia Melaka2
Abderrahmane Manu HaddadCardiff University1
B.C. KokTun Hussein Onn University of Malaysia1
M. H. M. SharifTun Hussein Onn University of Malaysia1
Muhamad Hafiy Syazwan ZainoddinUniversiti Teknikal Malaysia Melaka1
Aminudin AmanUniversiti Teknikal Malaysia Melaka1
Zainab ZainalTun Hussein Onn University of Malaysia1
Matiullah AhsanTun Hussein Onn University of Malaysia1
Md Nor Ramdon BaharomTun Hussein Onn University of Malaysia1
Omar Abu HassanTun Hussein Onn University of Malaysia1
Faridah HanimAfiliasi tidak diketahui1
Mohd Zamri Che WanikUniversiti Malaysia Kelantan1
Nur Izyan Husnina ZulkefliUniversiti Teknikal Malaysia Melaka1
Nor Hidayah RahimUniversiti Teknikal Malaysia Melaka1
Muhammad Syahrani JohalUniversiti Teknikal Malaysia Melaka1
Muhammad Asyraf ZainalAfiliasi tidak diketahui1
Mohamad Nazri Mohamad DinAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of Test Vessel for Gas Insulation Breakdown Test</dc:title>
	<dc:creator>Zahari, Ayuamira</dc:creator>
	<dc:creator>Zainuddin, Hidayat</dc:creator>
	<dc:creator>Saufi Kamarudin, Muhammad</dc:creator>
	<dc:creator>Ambo, Nur Farhani</dc:creator>
	<dc:creator>Mohd Wari, Jamaludin</dc:creator>
	<dc:creator>Sutan Chairul, Imran</dc:creator>
	<dc:description xml:lang="en-US">This paper discusses a new test vessel developed to investigate the breakdown test performance of gas insulation. The test vessel is equipped with certain specialty including pressure chamber and control measures. Through help from a steering, it is provide of controlling the gap length of the electrodes without the need of removing the gas. Other control measures include humidity, temperature, and pressure readings. The humidity and temperature are read wirelessly and from the readings, the necessary atmospheric corrections can be made according to standards. The developed vessel is then tested with AC breakdown test using air with various gap lengths and various electrode configurations. There are two types of electrode configuration used in this project i.e., rod (R0.5)-plane and plane-plane.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11826</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i2.pp873-879</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 2: June 2018; 873-879</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11826/11254</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Ayuamira Zahari, Hidayat Zainuddin, Muhammad Saufi Kamarudin, Nur Farhani Ambo, Jamaludin Mohd Wari, Imran Sutan Chairul</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>