Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A field-oriented control method using the virtual currents for the induction motor drive

International Journal of Power Electronics and Drive Systems · Vol. 12 No. 4 (2021) · hlm. 2095–2102

DOI
10.11591/ijpeds.v12.i4.pp2095-2102
ISSN
2722-256X, 2088-8694
Terbit
2021-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

An improving field-oriented control technique without current sensors is proposed to control rotor speed for an induction motor drive. The estimated stator currents based on the slip frequency are used instead of feedback current signals in the field-oriented control (FOC) loop. The reference signals and the estimated currents through computation steps are used to generate the control voltage for the switching inverter. Simulations were performed in Matlab/Simulink environment at rated speed and low-speed range to demonstrate the method's feasibility. Through simulation results, the FOC method using virtual sensors has proved its effectiveness in ensuring the stable operation of the induction motor drive (IMD) over a wide speed range.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 48 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Ton Duc Thang University
  • VSB - Technical University of Ostrava
  • Saigon University
  • Van Lang University
  • Ho Chi Minh City University of Industry and Trade
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Minh Chau Huu NguyenVSB - Technical University of Ostrava5
Bach Hoang DinhTon Duc Thang University4
Pavel BrandštetterVSB - Technical University of Ostrava3
Sang Dang HoTon Duc Thang University3
Phuong Nhat PhamTon Duc Thang University2
Petr PalackýVSB - Technical University of Ostrava1
Martin KuchařVSB - Technical University of Ostrava1
Quang Sy VuVan Lang University1
Chau Si Thien DongTon Duc Thang University1
Hung Tan HuynhTon Duc Thang University1
Huy Xuan PhanAfiliasi tidak diketahui1
Thang Trung NguyenTon Duc Thang University1
Chiem Trong HienHo Chi Minh City University of Industry and Trade1
Bao Quoc NguyenTon Duc Thang University1
Xuan Tien NguyenSaigon University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A field-oriented control method using the virtual currents for the induction motor drive</dc:title>
	<dc:creator>Tran, Cuong Dinh</dc:creator>
	<dc:creator>Nguyen, Tien Xuan</dc:creator>
	<dc:creator>Nguyen, Phuong Duy</dc:creator>
	<dc:subject xml:lang="en-US">Estimated current; Field-oriented control; Induction motor; Slip frequency; Virtual sensor</dc:subject>
	<dc:description xml:lang="en-US">An improving field-oriented control technique without current sensors is proposed to control rotor speed for an induction motor drive. The estimated stator currents based on the slip frequency are used instead of feedback current signals in the field-oriented control (FOC) loop. The reference signals and the estimated currents through computation steps are used to generate the control voltage for the switching inverter. Simulations were performed in Matlab/Simulink environment at rated speed and low-speed range to demonstrate the method's feasibility. Through simulation results, the FOC method using virtual sensors has proved its effectiveness in ensuring the stable operation of the induction motor drive (IMD) over a wide speed range.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21581</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v12.i4.pp2095-2102</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 12, No 4: December 2021; 2095-2102</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v12.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21581/13605</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Cuong Dinh Tran, Tien Xuan Nguyen, Phuong Duy Nguyen</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>