Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Integrated electric vehicle design and simulation: Combining a mechanical and electrical model using Simscape/Multibody

International Journal of Power Electronics and Drive Systems · Vol. 15 No. 4 (2024) · hlm. 2037–2048

DOI
10.11591/ijpeds.v15.i4.pp2037-2048
ISSN
2722-256X, 2088-8694
Terbit
2024-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents a novel methodology for modeling and implementing an electric vehicle (EV) simulation model using the Multibody approach. The proposed method provides a robust solution for studying EV performance, taking into consideration the dynamic behavior of its complex mechanical system. The mechanical design was carried out using SOLIDWORKS software and then exported to the Simscape/Multibody platform. This process was performed to combine the obtained mechanical design with an electrical model, developed using the Simscape and MATLAB/Simulink toolbox, in the same simulation platform. The proposed EV is powered by an electromechanical PowerDrive based on a permanent magnet synchronous machine (PMSM), supplied by a hybrid energy storage system (HESS). The implemented HESS, operating in a fully active topology, is controlled by a deterministic rule-based energy management system (EMS). To evaluate the proposed model performance, simulations were conducted under ECE-15.

Kata kunci

Jaringan kolaborasi para penulis

11 penulis · 22 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Université Moulay Ismail de Meknes
  • Mohammed V University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Oumayma RachidiUniversité Moulay Ismail de Meknes1
Chafik Ed-dahmaniUniversité Moulay Ismail de Meknes1
Badr Bououlid IdrissiAfiliasi tidak diketahui1
Ahmed EssadkiMohammed V University1
Tamou NasserMohammed V University1
Issam MinkaMohammed V University1
Sara MensouMohammed V University1
Lahssan Ben TarlaUniversité Moulay Ismail de Meknes1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Integrated electric vehicle design and simulation: Combining a mechanical and electrical model using Simscape/Multibody</dc:title>
	<dc:creator>Jbari, Hatim</dc:creator>
	<dc:creator>Askour, Rachid</dc:creator>
	<dc:creator>Idrissi, Badr Bououlid</dc:creator>
	<dc:subject xml:lang="en-US">Electric vehicle; hybrid energy storage system; PID control; Simscape/Multibody; supercapacitors</dc:subject>
	<dc:description xml:lang="en-US">This paper presents a novel methodology for modeling and implementing an electric vehicle (EV) simulation model using the Multibody approach. The proposed method provides a robust solution for studying EV performance, taking into consideration the dynamic behavior of its complex mechanical system. The mechanical design was carried out using SOLIDWORKS software and then exported to the Simscape/Multibody platform. This process was performed to combine the obtained mechanical design with an electrical model, developed using the Simscape and MATLAB/Simulink toolbox, in the same simulation platform. The proposed EV is powered by an electromechanical PowerDrive based on a permanent magnet synchronous machine (PMSM), supplied by a hybrid energy storage system (HESS). The implemented HESS, operating in a fully active topology, is controlled by a deterministic rule-based energy management system (EMS). To evaluate the proposed model performance, simulations were conducted under ECE-15.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2024-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23544</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v15.i4.pp2037-2048</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 15, No 4: December 2024; 2037-2048</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v15.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23544/14715</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Hatim JBARI, Rachid Askour, Badr Bououlid Idrissi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>