Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

New DTC strategy of multi-machines single-inverter systems for electric vehicle traction applications

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 2 (2020) · hlm. 641–650

DOI
10.11591/ijpeds.v11.i2.pp641-650
ISSN
2722-256X, 2088-8694
Terbit
2020-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In high power traction system applications two or more machines are fed by one converter. This topology results in a light, more compact and less costly system. These systems are called multi-machines single-converter systems. The problems posed by different electrical and mechanical couplings in these systems (MMS) affect various stages of the systems and require control strategy to reduce adverse effects. Control of multi-machines single-converter systems is the subject of this paper. The studied MMS is an electric vehicle with four in-wheel PMS motors. A three-leg inverter supplies two permanent magnet synchronous machines which are connected to the front right and rear right wheels, and another inverter supplies the left side. Several methods have been proposed for the control of multi-machines single-inverter systems, the master-slave control structure seems best adapted for our traction system. In this paper, a new control structure based on DTC method is used for the control of bi-machine traction system of an EV. This new control has been implanted in simulation to analyze its robustness in the presence of the various load cases involved in our electric vehicle traction chain. Simulation results indicated that this structure control allowed the stability of the traction system.

Jaringan kolaborasi para penulis

18 penulis · 42 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Université de Saida Dr Moulay Tahar
  • University of Bechar
  • Université des Sciences et de la Technologie d'Oran Mohamed Boudiaf
  • École Nationale Polytechnique d'Oran
  • University of Hertfordshire
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Othmane AbdelkhalekUniversity of Bechar2
Toufik ToumiUniversity of Bechar2
Benhamou AissaAfiliasi tidak diketahui1
Oussama HafsiUniversity of Bechar1
Benabedellah AbdelkaderUniversity of Bechar1
Abdelfatah NasriUniversity of Bechar1
Mohammed Amine SoumeurUniversity of Bechar1
Houari Merabet BoulouihaÉcole Nationale Polytechnique d'Oran1
Boumerid Bensahila Med El AmineUniversité des Sciences et de la Technologie d'Oran Mohamed Boudiaf1
Denai MouloudUniversity of Hertfordshire1
Benkhalfallah AddaUniversité de Saida Dr Moulay Tahar1
Norediene AouadjUniversité de Saida Dr Moulay Tahar1
Abdelkader Karim BelhiaUniversité de Saida Dr Moulay Tahar1
Khadidja HadjiUniversité de Saida Dr Moulay Tahar1
Tarik Mohammed ChikoucheUniversité de Saida Dr Moulay Tahar1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">New DTC strategy of multi-machines single-inverter systems for electric vehicle traction applications</dc:title>
	<dc:creator>Ahmed, Taibi</dc:creator>
	<dc:creator>Kada, Hartani</dc:creator>
	<dc:creator>Ahmed, Allali</dc:creator>
	<dc:description xml:lang="en-US">In high power traction system applications two or more machines are fed by one converter. This topology results in a light, more compact and less costly system. These systems are called multi-machines single-converter systems. The problems posed by different electrical and mechanical couplings in these systems (MMS) affect various stages of the systems and require control strategy to reduce adverse effects. Control of multi-machines single-converter systems is the subject of this paper. The studied MMS is an electric vehicle with four in-wheel PMS motors. A three-leg inverter supplies two permanent magnet synchronous machines which are connected to the front right and rear right wheels, and another inverter supplies the left side. Several methods have been proposed for the control of multi-machines single-inverter systems, the master-slave control structure seems best adapted for our traction system. In this paper, a new control structure based on DTC method is used for the control of bi-machine traction system of an EV. This new control has been implanted in simulation to analyze its robustness in the presence of the various load cases involved in our electric vehicle traction chain. Simulation results indicated that this structure control allowed the stability of the traction system.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">Electrical Engineering Department</dc:contributor>
	<dc:date>2020-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20358</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i2.pp641-650</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 2: June 2020; 641-650</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20358/13070</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Taibi Ahmed, Hartani Kada, Allali Ahmed</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>