Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A comparative study for the performance operation of electric machine based on conventional and D-Q theories

International Journal of Power Electronics and Drive Systems · Vol. 12 No. 3 (2021) · hlm. 1304–1314

DOI
10.11591/ijpeds.v12.i3.pp1304-1314
ISSN
2722-256X, 2088-8694
Terbit
2021-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Induction motors are used widely in industrial applications, thanks to their high efficiency and reliability which nominates it as a good machine used in various application. Based on the application and accuracy, modeling processes of electric machines are carried out using different mathematical methods. The most common method for modeling electrical machines is based on solution of differential equations of voltages as well as calculating the time varying self-inductances and the mutual inductances based on the rotor angle. One of the most important features of this method is that the inductance is no long depend on the time varying voltage, which is the major problem facing the conventional model. But the D-Q modeling approach has several problems, the greatest of which is that the voltage applied on stator must be balanced in addition to the fact that the winding are sinusoidal distributed form. Herein this research is focused on build two models of a 3-Φ induction motor (IM) based on the two analytical approaches and compare them to clarify the difference. The results have been shown that the conventional model gives more accurate response when it is applied in both normal and upnormal operation. MATLAB/Simulink softare is used to construct the D-Q and classical abc IM models.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 47 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Northern Technical University
  • Middle Technical University
  • University of Mosul
  • University of Plymouth
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Laith A. KhalafNorthern Technical University2
Nashwan Saleh SultanNorthern Technical University2
Ali Nasser HussainMiddle Technical University1
Firas Saaduldeen AhmedMiddle Technical University1
Mohammed Y. SulimanNorthern Technical University1
Ahmed H. AhmedNorthern Technical University1
Enaam AlbannaNorthern Technical University1
Ahmed A. Abdullah Al-KarakchiNorthern Technical University1
Zozan Saadallah HussainNorthern Technical University1
Rakan Khalil AntarNorthern Technical University1
Ahmed Ateya AlluNorthern Technical University1
Hiba Esam AzizNorthern Technical University1
Imad Idan Abed Al-KhalafNorthern Technical University1
Tamer KamelUniversity of Plymouth1
Ziyad Khalaf FarejNorthern Technical University1
Ahmed Hashim AhmedNorthern Technical University1
Ahmed Saad YahyaAfiliasi tidak diketahui1
Basil Mohammed SaiedUniversity of Mosul1
Mohammed Obaid MustafaUniversity of Mosul1
Mahmood Taha AlkhayyatNorthern Technical University1
Ziad Saeed MohammedNorthern Technical University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A comparative study for the performance operation of electric machine based on conventional and D-Q theories</dc:title>
	<dc:creator>AL hajzber, Sanabel M.</dc:creator>
	<dc:creator>Ali, Ahmed J.</dc:creator>
	<dc:creator>AL-Rifaie, Alya H.</dc:creator>
	<dc:creator>Shanshal, Abdullah K.</dc:creator>
	<dc:subject xml:lang="en-US">Differential equations; D-Q model; Equivalent magnetic circuit; Finite Element method; Induction motors</dc:subject>
	<dc:description xml:lang="en-US">Induction motors are used widely in industrial applications, thanks to their high efficiency and reliability which nominates it as a good machine used in various application. Based on the application and accuracy, modeling processes of electric machines are carried out using different mathematical methods. The most common method for modeling electrical machines is based on solution of differential equations of voltages as well as calculating the time varying self-inductances and the mutual inductances based on the rotor angle. One of the most important features of this method is that the inductance is no long depend on the time varying voltage, which is the major problem facing the conventional model. But the D-Q modeling approach has several problems, the greatest of which is that the voltage applied on stator must be balanced in addition to the fact that the winding are sinusoidal distributed form. Herein this research is focused on build two models of a 3-Φ induction motor (IM) based on the two analytical approaches and compare them to clarify the difference. The results have been shown that the conventional model gives more accurate response when it is applied in both normal and upnormal operation. MATLAB/Simulink softare is used to construct the D-Q and classical abc IM models.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21450</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v12.i3.pp1304-1314</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 12, No 3: September 2021; 1304-1314</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v12.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21450/13477</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Sanabel M. AL hajzber, Ahmed J. Ali, Alya H. AL-Rifaie, Abdullah K. Shanshal</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>