Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Optimizing regenerative braking on electric vehicles using a model-based algorithm in the antilock braking system

International Journal of Power Electronics and Drive Systems · Vol. 14 No. 1 (2023) · hlm. 131–139

DOI
10.11591/ijpeds.v14.i1.pp131-139
ISSN
2722-256X, 2088-8694
Terbit
2023-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The regenerative braking effectiveness of electric vehicles (EVs), with 8-25% range, requires designers to produce better braking systems. The antilock braking system (ABS) was chosen because it offers various advantages, such as enhanced safety considerations, vehicle maneuverability, and so on. The measurement findings revealed that ABS took longer to stop the wheels with the same wheel rotation speed. Because of the lesser differentiation of magnetic flux to time, it created lower induced emf in the generator. ABS 50 Hz performance was 19.5% at 4500 pm, whereas hydraulic brake performance was 21% at the same speed. ABS used model-based algorithms (MBAs) to boost the friction frequency with the wheels from 10 to 50 Hz. As the frequency increased, the ABS graph approached the hydraulic graph, and the ABS performance improved. Although ABS loses to hydraulics in stopping wheel rotation, it gains in saved energy and battery temperature. Longer wheel stop-times allow the rotational kinetic energy of the wheel more time to be converted into electricity.

Kata kunci

Jaringan kolaborasi para penulis

30 penulis · 89 tautan kepenulisan bersama · 39 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Negeri Surabaya
  • Institut Teknologi Sepuluh Nopember
  • National Research and Innovation Agency
  • Universitas Airlangga
  • Sapienza University of Rome
  • Hokkaido University
  • National Cheng Kung University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Aris PurwantoUniversitas Negeri Surabaya3
Po-Hung LinNational Cheng Kung University3
Andika Bayu PutroAfiliasi tidak diketahui2
I Made Londen BatanInstitut Teknologi Sepuluh Nopember2
Ahmad Anas ArifinInstitut Teknologi Sepuluh Nopember2
Michele BiciSapienza University of Rome2
Muchamad Arif Al ArdhaUniversitas Negeri Surabaya1
Dzulkifl DzulkiflUniversitas Negeri Surabaya1
Wahyu Dwi KurniawanUniversitas Negeri Surabaya1
Bimo Bintang PriantoroAfiliasi tidak diketahui1
I Wayan Valentino Eka PutraUniversitas Negeri Surabaya1
Awang FirmansyahUniversitas Negeri Surabaya1
Hapsari Peni Agustin TjahyaningtijasUniversitas Negeri Surabaya1
Ahmad Hafizh Ainur RasyUniversitas Negeri Surabaya1
Mustasyar PerkasaNational Research and Innovation Agency1
Jean Mario ValentinoNational Research and Innovation Agency1
Achmad SyaifudinInstitut Teknologi Sepuluh Nopember1
Lukman ShalahuddinNational Research and Innovation Agency1
Katsuhiko SASAKIHokkaido University1
Prisma MegantoroUniversitas Airlangga1
Lilik Jamilatul AwalinUniversitas Airlangga1
Yoga Uta NugrahaInstitut Teknologi Sepuluh Nopember1
Indra SidhartaInstitut Teknologi Sepuluh Nopember1
Agus MukhlisinUniversitas Airlangga1
Estiko RijantoNational Research and Innovation Agency1
Arif WahjudiInstitut Teknologi Sepuluh Nopember1
Arif WahjudiInstitut Teknologi Sepuluh Nopember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Optimizing regenerative braking on electric vehicles using a model-based algorithm in the antilock braking system</dc:title>
	<dc:creator>Budijono, Agung Prijo</dc:creator>
	<dc:creator>Sutantra, I Nyoman</dc:creator>
	<dc:creator>Pramono, Agus Sigit</dc:creator>
	<dc:subject xml:lang="en-US">Antilock braking system; Electric vehicles; Friction frequency; Harvesting energy; Model-based algorithms; Regenerative braking</dc:subject>
	<dc:description xml:lang="en-US">The regenerative braking effectiveness of electric vehicles (EVs), with 8-25% range, requires designers to produce better braking systems. The antilock braking system (ABS) was chosen because it offers various advantages, such as enhanced safety considerations, vehicle maneuverability, and so on. The measurement findings revealed that ABS took longer to stop the wheels with the same wheel rotation speed. Because of the lesser differentiation of magnetic flux to time, it created lower induced emf in the generator. ABS 50 Hz performance was 19.5% at 4500 pm, whereas hydraulic brake performance was 21% at the same speed. ABS used model-based algorithms (MBAs) to boost the friction frequency with the wheels from 10 to 50 Hz. As the frequency increased, the ABS graph approached the hydraulic graph, and the ABS performance improved. Although ABS loses to hydraulics in stopping wheel rotation, it gains in saved energy and battery temperature. Longer wheel stop-times allow the rotational kinetic energy of the wheel more time to be converted into electricity.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22116</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v14.i1.pp131-139</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 14, No 1: March 2023; 131-139</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v14.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22116/14068</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/downloadSuppFile/22116/3098</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/downloadSuppFile/22116/3115</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Agung Prijo Budijono, I Nyoman Sutantra, Agus Sigit Pramono</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>