Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

High Torque Flux Switching Permanent Magnet Machine in Segmented Outer Rotor using Appropriate Split Ratio for Electric Scooter Propulsion

International Journal of Power Electronics and Drive Systems · Vol. 8 No. 4 (2017) · hlm. 1642–1649

DOI
10.11591/ijpeds.v8.i4.pp1642-1649
ISSN
2722-256X, 2088-8694
Terbit
2017-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Recently, permanent magnet synchronous machine (PMSM) having the diameter of 11inches was successfully developed and installed in electric scooter vehicle (ESV) for propulsion. It consists of segmented stators of 24 armature slots and 100 pieces of permanent magnet of 2 kg weight mounted on rotating rotor. Upon the huge amount of materials and permanent magnet used, PMSM produced 110Nm only. Looking at the size, this torque is low and could not sustain acceleration for long distance travels. To overcome the challenge of low torque, this paper presents a new machine type, flux switching motor (FSM) with 1 kg weight of permanent magnet flux source employing segmented outer rotor. Six ranges of split ratio of 0.80-0.85 for outer rotor 24slot-14pole FSPM motor configurations were designed and compared. The 2D-FEA by JMAG software version 14 is used to examine its performance in term of flux linkage, cogging torque, back-emf and average torque which the structure with split ratio of 0.85 took lead by securing highest torque profile of 209Nm. It also achieved low cogging torque to operate in safe region. In conclusion, appropriate split ratio significantly enhances high torque capability of permanent magnet flux switching motor for electric scooter propulsion.

Jaringan kolaborasi para penulis

25 penulis · 87 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Universiti Teknikal Malaysia Melaka
  • Taylor's University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mahyuzie JenalTun Hussein Onn University of Malaysia5
Zarafi AhmadTun Hussein Onn University of Malaysia4
Mohd Fairoz OmarTun Hussein Onn University of Malaysia4
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia4
Laili Iwani JusohTun Hussein Onn University of Malaysia3
Fatihah Shafiqah BahrimTun Hussein Onn University of Malaysia3
E. SulaimanAfiliasi tidak diketahui3
Mohd Firdaus Mohd Ab HalimUniversiti Teknikal Malaysia Melaka2
Rajesh KumarTun Hussein Onn University of Malaysia2
Zarafi Md. AhmadTun Hussein Onn University of Malaysia2
Gadafi M RomalanTun Hussein Onn University of Malaysia2
Chockalingam Aravind VaithilingamTaylor's University2
Jaudah Abd RaniTun Hussein Onn University of Malaysia2
Raja Nor Firdaus Kashfi Raja OthmanUniversiti Teknikal Malaysia Melaka1
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia1
J.A. RahimTun Hussein Onn University of Malaysia1
Hassan AliTun Hussein Onn University of Malaysia1
Irfan AliTun Hussein Onn University of Malaysia1
Mohd FirdausUniversiti Teknikal Malaysia Melaka1
Azhan Ab RahmanUniversiti Teknikal Malaysia Melaka1
Muhammad Sharil YahayaUniversiti Teknikal Malaysia Melaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">High Torque Flux Switching Permanent Magnet Machine in Segmented Outer Rotor using Appropriate Split Ratio for Electric Scooter Propulsion</dc:title>
	<dc:creator>Mbadiwe I, Enwelum</dc:creator>
	<dc:creator>Sulaiman, Erwan</dc:creator>
	<dc:creator>Zarafi, Ahmad Md</dc:creator>
	<dc:creator>Rahimi, Siti Khalidah</dc:creator>
	<dc:description xml:lang="en-US">Recently, permanent magnet synchronous machine (PMSM) having the diameter of 11inches was successfully developed and installed in electric scooter vehicle (ESV) for propulsion. It consists of segmented stators of 24 armature slots and 100 pieces of permanent magnet of 2 kg weight mounted on rotating rotor. Upon the huge amount of materials and permanent magnet used, PMSM produced 110Nm only. Looking at the size, this torque is low and could not sustain acceleration for long distance travels. To overcome the challenge of low torque, this paper presents a new machine type, flux switching motor (FSM) with 1 kg weight of permanent magnet flux source employing segmented outer rotor.  Six ranges of split ratio of 0.80-0.85 for outer rotor 24slot-14pole FSPM motor configurations were designed and compared. The 2D-FEA by JMAG software version 14 is used to examine its performance in term of flux linkage, cogging torque, back-emf and average torque which the structure with split ratio of 0.85 took lead by securing highest torque profile of 209Nm. It also achieved low cogging torque to operate in safe region. In conclusion, appropriate split ratio significantly enhances high torque capability of permanent magnet flux switching motor for electric scooter propulsion.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2017-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8589</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v8.i4.pp1642-1649</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 8, No 4: December 2017; 1642-1649</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v8.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8589/7774</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 Enwelum Mbadiwe I, Erwan Sulaiman, Ahmad Md Zarafi, Siti Khalidah Rahimi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>