Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Maximum Power Point Tracking of Wind Turbine Conversion Chain Variable Speed Based on DFIG

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 2 (2018) · hlm. 527–535

DOI
10.11591/ijpeds.v9.i2.pp527-535
ISSN
2722-256X, 2088-8694
Terbit
2018-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Wind energy has many advantages, it does not pollute and it is an inexhaustible source. However, the cost of this energy is still too high to compete with traditional fossil sources. The yield of a wind turbine depends on three parameters: the power of the wind, the turbine power curve and the ability of the generator to respond to fluctuations in the wind. This article presented the MPPT of a wind turbine system equipped with an asynchronous generator has dual power under MatlabSimulink program, in the first time we simulated all the conversion chain with complete model of DFIG and vector control in second stepthen applied the extracted maximum power MPPT strategists, this command is effective and has several advantages it offered to kept the maximum power delivered to network despite all the parameter is change.

Jaringan kolaborasi para penulis

14 penulis · 28 tautan kepenulisan bersama · 11 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Bechar
  • Ahmed Draia University
  • University of Tamanghasset
  • Université de Haute-Alsace
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bousmaha BouchibaUniversity of Bechar2
Ismaïl Khalil BousserhaneUniversity of Bechar2
Patrice WiraUniversité de Haute-Alsace1
Mohammed AoumriAhmed Draia University1
Ibrahim YaichiAhmed Draia University1
Badreddine BellaliUniversity of Bechar1
Smail MansouriAhmed Draia University1
Mohammed BouzidiUniversity of Tamanghasset1
Mohammed TadjUniversity of Tamanghasset1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Maximum Power Point Tracking of Wind Turbine Conversion Chain Variable Speed Based on DFIG</dc:title>
	<dc:creator>Becheri, H.</dc:creator>
	<dc:creator>Bousarhanne, I. K.</dc:creator>
	<dc:creator>Harrouz, A.</dc:creator>
	<dc:creator>Glaoui, H.</dc:creator>
	<dc:creator>Belbekri, T.</dc:creator>
	<dc:description xml:lang="en-US">Wind energy has many advantages, it does not pollute and it is an inexhaustible source. However, the cost of this energy is still too high to compete with traditional fossil sources. The yield of a wind turbine depends on three parameters: the power of the wind, the turbine power curve and the ability of the generator to respond to fluctuations in the wind. This article presented the MPPT of a wind turbine system equipped with an asynchronous generator has dual power under MatlabSimulink program, in the first time we simulated all the conversion chain with complete model of DFIG and vector control in second stepthen applied the extracted maximum power MPPT strategists, this command is effective and has several advantages it offered to kept the maximum power delivered to network despite all the parameter is change.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/10327</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i2.pp527-535</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 2: June 2018; 527-535</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/10327/11177</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/downloadSuppFile/10327/987</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 H. Becheri, I. K. Bousarhanne, A. Harrouz, H. Glaoui, T. Belbekri</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>