Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Fuzzy Ga Based STATCOM for Power Quality Improvement

International Journal of Power Electronics and Drive Systems · Vol. 8 No. 1 (2017) · hlm. 483–491

DOI
10.11591/ijpeds.v8.i1.pp483-491
ISSN
2722-256X, 2088-8694
Terbit
2017-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper deals with various power issues such as voltage sag, swell, harmonics, and surges using static synchronous compensator (STATCOM).The conventional controller suffers from uncertain parameters and non-linear qualities. However they are computationally inefficient extending to optimize the fuzzy controller (FC) parameters, since they exhaustively search the optimal values to optimize the objective functions. To overcome this drawback, a genetic algorithm (GA) based Fuzzy controller parameter optimization is presented in this paper. The GA algorithm is used to find the optimal fuzzy parameters for minimizing the objective functions. The feasibility of the proposed GA technique for distribution systems to improve the sag and total harmonic distortion (THD) as major power quality indices in sensitive loads at fault conditions has been simulated and tested. Therefore, the multi-objective optimization algorithm is considered in order to attain a better performance in solving the related problems.

Jaringan kolaborasi para penulis

11 penulis · 25 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indian Institute of Technology Madras
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
C. S. Ajin SekarAfiliasi tidak diketahui2
K. P. NithyaAfiliasi tidak diketahui2
N. KarthikeyanIndian Institute of Technology Madras1
M. PadmarasanIndian Institute of Technology Madras1
C. T. ManikandanIndian Institute of Technology Madras1
C. S. Ajin SekharIndian Institute of Technology Madras1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Fuzzy Ga Based STATCOM for Power Quality Improvement</dc:title>
	<dc:creator>Deepa, S.</dc:creator>
	<dc:creator>Praba, S.</dc:creator>
	<dc:creator>Deepalakshmi, V.</dc:creator>
	<dc:creator>Jayaprakash, L.</dc:creator>
	<dc:creator>Manimurugan, M.</dc:creator>
	<dc:description xml:lang="en-US">This paper deals with various power issues such as voltage sag, swell, harmonics, and surges using static synchronous compensator (STATCOM).The conventional controller suffers from uncertain parameters and non-linear qualities. However they are computationally inefficient extending to optimize the fuzzy controller (FC) parameters, since they exhaustively search the optimal values to optimize the objective functions. To overcome this drawback, a genetic algorithm (GA) based Fuzzy controller parameter optimization is presented in this paper. The GA algorithm is used to find the optimal fuzzy parameters for minimizing the objective functions. The feasibility of the proposed GA technique for distribution systems to improve the sag and total harmonic distortion (THD) as major power quality indices in sensitive loads at fault conditions has been simulated and tested. Therefore, the multi-objective optimization algorithm is considered in order to attain a better performance in solving the related problems.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2017-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/6176</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v8.i1.pp483-491</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 8, No 1: March 2017; 483-491</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v8.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/6176/6066</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 S. Deepa, S. Praba, V. Deepalakshmi, L. Jayaprakash, M. Manimurugan</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>