Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Fuzzy logic control based MPPT for standalone photovoltaic system with battery storage

International Journal of Power Electronics and Drive Systems · Vol. 14 No. 4 (2023) · hlm. 2527–2536

DOI
10.11591/ijpeds.v14.i4.pp2527-2536
ISSN
2722-256X, 2088-8694
Terbit
2023-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Considering its favorable characteristics, photovoltaic energy is widely recognized as highly beneficial to the environment. To achieve continuous maximum output power across the PV system, an efficient control strategy is developed after studying several maximum power point detection (MPPT) techniques. Consequently, this paper presents a useful control technique for maximizing power extraction from PV systems under varying conditions. The paper focuses on the design of a fuzzy logic control (FLC)-based maximum power point tracking (MPPT) system for a standalone photovoltaic (SAPV) system with battery storage. The FLC is employed to extract the maximum power from a PV module and integrate it with the battery to supply the load. The FLC offers advantages over conventional MPPT methods, such as accurate and rapid response to changes in environmental conditions, including solar irradiance and temperature. The PV system exhibits low total harmonic distortion (THD), making it ideal for household appliances, and can deliver 230 Vrms of single-phase output AC power. The system is designed and implemented in MATLAB/Simulink, incorporating a solar module, DC-to-DC converters, battery storage, and an inverter for supplying AC loads. Simulation results for selected test conditions are presented and discussed. The system performance is evaluated through steady state tests and dynamic tests in simulations.

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 70 tautan kepenulisan bersama · 19 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknologi MARA
  • Kaduna Polytechnic
  • Universiti Teknikal Malaysia Melaka
  • University of Kuala Lumpur
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhammad Hasbi AzmiUniversiti Teknologi MARA7
Muhammad Murtadha OthmanUniversiti Teknologi MARA4
Ayman Nurshazwan Abdul RashidAfiliasi tidak diketahui3
Zuhaila Mat YasinUniversiti Teknologi MARA2
Faranadia Abdul HarisUniversiti Teknologi MARA2
Zubairu Gatugel UsmanKaduna Polytechnic2
Nofri Yenita DahlanUniversiti Teknologi MARA1
Elia Erwani HassanUniversiti Teknikal Malaysia Melaka1
Nur Syifa Nasyrah RazaliUniversiti Teknologi MARA1
Nurfadzilah AhmadUniversiti Teknologi MARA1
Ismail MusirinUniversiti Teknologi MARA1
Muhammad Alif MansorUniversiti Teknologi MARA1
N. AminudinUniversiti Teknologi MARA1
N. RosmiziUniversiti Teknologi MARA1
Nur Ashida SalimUniversiti Teknologi MARA1
Hasmaini MohamadUniversiti Teknologi MARA1
Mohammad Shariful IslamUniversiti Teknologi MARA1
Khairul Safuan MuhammadUniversiti Teknologi MARA1
Fajariah KadirUniversiti Teknologi MARA1
A. RaziUniversiti Teknikal Malaysia Melaka1
Mohammad Nawawi SerojiUniversiti Teknologi MARA1
Muhamad Nabil Bin HidayatUniversiti Teknologi MARA1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Fuzzy logic control based MPPT for standalone photovoltaic system with battery storage</dc:title>
	<dc:creator>Taib, Nur Syafiqah Mohd</dc:creator>
	<dc:creator>Noor, Siti Zaliha Mohammad</dc:creator>
	<dc:creator>Musa, Suleiman</dc:creator>
	<dc:creator>Aziz, Pusparini Dewi Abd</dc:creator>
	<dc:subject xml:lang="en-US">battery storage; FLC; MPPT; MATLAB/Simulink; SAPV system</dc:subject>
	<dc:description xml:lang="en-US">Considering its favorable characteristics, photovoltaic energy is widely recognized as highly beneficial to the environment. To achieve continuous maximum output power across the PV system, an efficient control strategy is developed after studying several maximum power point detection (MPPT) techniques. Consequently, this paper presents a useful control technique for maximizing power extraction from PV systems under varying conditions. The paper focuses on the design of a fuzzy logic control (FLC)-based maximum power point tracking (MPPT) system for a standalone photovoltaic (SAPV) system with battery storage. The FLC is employed to extract the maximum power from a PV module and integrate it with the battery to supply the load. The FLC offers advantages over conventional MPPT methods, such as accurate and rapid response to changes in environmental conditions, including solar irradiance and temperature. The PV system exhibits low total harmonic distortion (THD), making it ideal for household appliances, and can deliver 230 Vrms of single-phase output AC power. The system is designed and implemented in MATLAB/Simulink, incorporating a solar module, DC-to-DC converters, battery storage, and an inverter for supplying AC loads. Simulation results for selected test conditions are presented and discussed. The system performance is evaluated through steady state tests and dynamic tests in simulations.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">School of Electrical Engineering</dc:contributor>
	<dc:date>2023-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22251</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v14.i4.pp2527-2536</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 14, No 4: December 2023; 2527-2536</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v14.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22251/14384</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Siti Zaliha Mohammad Noor</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>