Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and Analysis of Capacitive Power Transfer System with and without the Impedance Matching Circuit

International Journal of Power Electronics and Drive Systems · Vol. 8 No. 3 (2017) · hlm. 1260–1273

DOI
10.11591/ijpeds.v8.i3.pp1260-1273
ISSN
2722-256X, 2088-8694
Terbit
2017-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents the design and analysis of a relatively new wireless power transfer technique using capacitive coupling, named Capacitive power transfer (CPT). In general, CPT system has been introduced as an attractive alternative to the former inductive coupling method. This is because CPT uses lesser number of components, simpler topology, enhanced EMI performance and better strength to surrounding metallic elements. In this work, aluminium sheet is used as a capacitive coupling at transmitter and receiver side. Moreover, a Class-E resonant inverter together with π1a impedance matching network has been proposed because of its ability to perform the dc-to-ac inversion well. It helps the CPT system to achieve maximum power transfer. The CPT system is designed and simulated by using MATLAB/Simulink software. The validity of the proposed concept is then verified by conducting a laboratory experimental of CPT system. The proposed system able to generate a 9.5W output power through a combined interface capacitance of 2.44nF, at an operating frequency of 1MHz, with 95.10% efficiency. The proposed CPT system with impedance matching network also allows load variation in the range of 20% from its nominal value while maintaining the efficiency over 90%.

Jaringan kolaborasi para penulis

39 penulis · 139 tautan kepenulisan bersama · 36 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • Universiti Teknologi MARA
  • Universiti Malaysia Terengganu
  • University of Auckland
  • Universiti Malaysia Perlis
  • Christian-Albrechts-Universität zu Kiel
  • University of Technology Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Siti Huzaimah HusinUniversiti Teknikal Malaysia Melaka10
Md Rabiul AwalUniversiti Malaysia Terengganu9
Khairul Kamarudin HasanUniversiti Teknologi MARA9
A. A. M. IsaUniversiti Teknikal Malaysia Melaka6
Cheok Yan QiUniversiti Teknikal Malaysia Melaka6
Ahmad Husni Mohd ShapriUniversiti Malaysia Perlis5
Yusmarnita YusofUniversiti Teknikal Malaysia Melaka3
Norezmi JamalUniversiti Teknikal Malaysia Melaka3
Thoriq ZaidUniversiti Teknikal Malaysia Melaka3
Muslimah MeorUniversiti Teknikal Malaysia Melaka3
Nor Diyana Md SinUniversiti Teknologi MARA3
R. A. RaniUniversiti Teknikal Malaysia Melaka3
F. K. Abdul RahmanAfiliasi tidak diketahui3
Amy Sarah NguUniversiti Teknikal Malaysia Melaka3
Noor Badariah AsanUniversiti Teknikal Malaysia Melaka3
Peter Adam HoeherChristian-Albrechts-Universität zu Kiel3
Mohd Haizal JamaluddinUniversity of Technology Malaysia3
Ahmed Al-HattamiAfiliasi tidak diketahui3
Mohd Shakir Md SaatUniversiti Teknikal Malaysia Melaka2
Sing Kiong NguangUniversity of Auckland2
N. X. YinUniversiti Teknikal Malaysia Melaka2
Masmaria Abdul MajidUniversiti Teknologi MARA2
Mohd Sufian RamliUniversiti Teknologi MARA2
M. S. M. IsaUniversiti Teknikal Malaysia Melaka2
N NabilaUniversiti Teknikal Malaysia Melaka2
Amat Amir BasariUniversiti Teknikal Malaysia Melaka2
Zaki MustapaUniversiti Teknikal Malaysia Melaka1
Imran HindustanUniversiti Teknikal Malaysia Melaka1
A. M. DarsonoUniversiti Teknikal Malaysia Melaka1
O. Z. GuatAfiliasi tidak diketahui1
F.K. Abdul RahmanAfiliasi tidak diketahui1
Muhammad Zaki MustapaUniversiti Teknikal Malaysia Melaka1
Zamre Abdul GhaniUniversiti Teknikal Malaysia Melaka1
SK NguangAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design and Analysis of Capacitive Power Transfer System with and without the Impedance Matching Circuit</dc:title>
	<dc:creator>Rahman, F.K.A.</dc:creator>
	<dc:creator>Saat, Shakir</dc:creator>
	<dc:creator>Yusop, Yusmarnita</dc:creator>
	<dc:creator>Husin, Huzaimah</dc:creator>
	<dc:creator>Aziz, Y.</dc:creator>
	<dc:description xml:lang="en-US">This paper presents the design and analysis of a relatively new wireless power transfer technique using capacitive coupling, named Capacitive power transfer (CPT). In general, CPT system has been introduced as an attractive alternative to the former inductive coupling method. This is because CPT uses lesser number of components, simpler topology, enhanced EMI performance and better strength to surrounding metallic elements. In this work, aluminium sheet is used as a capacitive coupling at transmitter and receiver side. Moreover, a Class-E resonant inverter together with π1a impedance matching network has been proposed because of its ability to perform the dc-to-ac inversion well. It helps the CPT system to achieve maximum power transfer. The CPT system is designed and simulated by using MATLAB/Simulink software. The validity of the proposed concept is then verified by conducting a laboratory experimental of CPT system. The proposed system able to generate a 9.5W output power through a combined interface capacitance of 2.44nF, at an operating frequency of 1MHz, with 95.10% efficiency. The proposed CPT system with impedance matching network also allows load variation in the range of 20% from its nominal value while maintaining the efficiency over 90%.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2017-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8372</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v8.i3.pp1260-1273</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 8, No 3: September 2017; 1260-1273</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v8.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8372/7023</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 F.K.A. Rahman, Shakir Saat, Yusmarnita Yusop, Huzaimah Husin, Y. Aziz</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>