Akses terbuka Jurnal SINTA 1
Design comparison of surface-mounted permanent magnet synchronous motors with inner and outer rotor configurations
International Journal of Power Electronics and Drive Systems · Vol. 15 No. 4 (2024) · hlm. 2105–2114
- ISSN
- 2722-256X, 2088-8694
- Terbit
- 2024-12-01
- Penerbit
- Institute of Advanced Engineering and Science
- Bahasa
- eng
Abstrak
The surface-mounted permanent magnet synchronous motor (SPMSM) is one of the electric machines applied widely in the fields of electric vehicles (EVs) and electrical drives due to their good characteristics such as high power density, lower mass, high efficiency, and lower torque. For the SPMSM, there are two types of SPMSM, i.e., the inner rotor SPMSM and the outer rotor SPMSM. To analyze and compute advantages and disadvantages, as well as to compare the performances of these two motor types, this research proposes an analytical model to design preliminarily the main/required parameters of the SPMSM with inner and outer rotor types. Subsequently, a finite element method is developed to simulate, analyze, and compare the electromagnetic parameters of the proposed motors. Via the developed methods, the obtained results will also indicate the performances of both types of motors. In particular, it will provide a good recommendation for choosing the SPMSM with an inner or outer rotor structure for traction applications.
Kata kunci
Jaringan kolaborasi para penulis
26 penulis · 62 tautan kepenulisan bersama · 20 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- University of Economics - Technology for Industries
- Hanoi University of Science and Technology
- Quy Nhon University
- Electric Power University
- Duy Tan University
- Thai Nguyen University of Technology
- Afiliasi tidak diketahui
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Hoang Dinh Co | University of Economics - Technology for Industries | 3 |
| Dang Quoc Du | Afiliasi tidak diketahui | 2 |
| Hung Bui Duc | Hanoi University of Science and Technology | 2 |
| Tu Minh Pham | Hanoi University of Science and Technology | 2 |
| Duc-Quang Nguyen | Electric Power University | 2 |
| Hoa Van Doan | University of Economics - Technology for Industries | 1 |
| Mai Van Tao | University of Economics - Technology for Industries | 1 |
| Pham Ngoc Sam | University of Economics - Technology for Industries | 1 |
| Pham Van Minh | University of Economics - Technology for Industries | 1 |
| Nguyen Duc Dien | University of Economics - Technology for Industries | 1 |
| Nguyen Van Ninh | Quy Nhon University | 1 |
| Nguyễn Văn Lâm | Afiliasi tidak diketahui | 1 |
| Tuan-Ho Le | Quy Nhon University | 1 |
| Phuong Nam Dao | Hanoi University of Science and Technology | 1 |
| Van Hai Nguyen | Duy Tan University | 1 |
| Nguyễn Anh Tuấn | University of Economics - Technology for Industries | 1 |
| Nguyễn Văn Toản | University of Economics - Technology for Industries | 1 |
| Tùng Lâm Nguyễn | Hanoi University of Science and Technology | 1 |
| Roan Van Hoa | University of Economics - Technology for Industries | 1 |
| Tran Thi Huong | University of Economics - Technology for Industries | 1 |
| Pham Thi Thu Ha | University of Economics - Technology for Industries | 1 |
| Bui Thi Hai Linh | Thai Nguyen University of Technology | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.